Custom Printed Nylon Folding Hand Fan with Pouch | Promotional

**Q: What food-grade documentation is available for this nylon folding fan, and how do I request it?**

A: The source lists the grade as Food Grade but does not include a certificate number or named standard. Food-grade test documentation for your destination market can be provided upon request. A verification step is to request the documentation and confirm it covers the specific nylon film and printing inks used on your order, and that the food-grade applicability matches how the fan will be used, before PO approval. Because requirements differ by region, confirm the applicable document set for the import market.



**Q: What is the AQL defect tolerance level for bulk folding fan shipments?**

A: The source does not state a specific AQL level. SupplyBatch recommends confirming the acceptable defect tolerance with the supplier in writing before finalizing the order. For this fan, the inspection scope should cover print registration and legibility on the translucent film, punching diameter against the 2 mm to 3 mm spec, fold function, edge finish, and the included pouch. A pre-shipment inspection can be arranged upon request to verify these points before packing.



**Q: Do you provide pre-shipment inspection reports with third-party QC sign-off?**

A: Pre-shipment inspection reports can be arranged upon request. The cost depends on the inspection scope and location. Because the source states no AQL level, the inspection report becomes the practical quality gate before final payment. For orders above 5,000 pieces, a third-party QC review is recommended to confirm bulk production matches the approved sample in print legibility, fold function, and punching accuracy.



**Q: What are the payment terms and accepted payment methods?**

A: Payment terms are not specified in the source data. Standard cross-border B2B transactions typically use T/T with a deposit percentage and balance before shipment. Buyers should confirm the exact deposit percentage, balance trigger point, and accepted payment methods directly with the supplier before issuing a purchase order.



**Q: What is the realistic production lead time from artwork approval to ready-to-ship?**

A: Lead time is 31 days for 1 to 5,000 pieces, 35 days for 5,001 to 50,000 pieces, and negotiated above 50,000 pieces. Buyers should add the sample approval phase to the overall project timeline, since custom design is completed in 3 days but the sample phase adds time. For event-driven orders, confirm the delivery date against the 31 to 35-day production window before committing.



**Q: What is the MOQ, and does it differ for the custom print?**

A: The source does not state a base MOQ figure, so confirm the production minimum in writing before quoting, and confirm whether it differs for a custom print order versus a stock fan. Color is as per Pantone, and three print methods are available, so confirm whether the Pantone match or the print method affects the minimum.



**Q: How does a nylon film folding fan compare to a paper folding fan?**

A: The source lists the nylon film with a tensile strength greater than 250.0 Mpa and a smooth surface, which supports repeated opening and closing. A paper folding fan uses a lighter fold construction. The trade-off is that the nylon film is translucent, so a printed design reads differently than on opaque paper, and the print legibility on the film should be validated on a sample.