Custom 18 Inch HPPE Cut Resistant Arm Sleeves | MOQ 200 Pairs

HPPE / Dyneema Level 5 vs. Standard Cotton or Polyester Sleeves: A standard cotton or polyester sleeve provides coverage without a cut rating. This sleeve is knitted from HPPE with a Dyneema component and rated Cut Level 5 under CE EN388, with ANSI/ISEA 105 Cut Grade A5 listed in the specification. The 13-gauge knit balances breathability with cut resistance, so the sleeve can be worn for extended shifts. The trade-off is a higher per-unit cost for the HPPE and Dyneema material compared to standard knits.

18 inch / 45 cm Extended Length vs. Standard Forearm Sleeves: The extended length covers more of the forearm than a standard short sleeve, which suits tasks where the full forearm is exposed to cut or abrasion risk, such as glass processing or metal work. The trade-off is that the longer length uses more material, reflected in the 0.100 kg per-unit weight. For tasks where only wrist-to-mid-forearm coverage is needed, a shorter sleeve would use less material.

Fixed Thumb Hole vs. Non-Thumb-Hole Design: The fixed thumb hole keeps the sleeve from sliding up the arm during extended wear, which matters when the wearer is reaching, lifting, or working with tools. A non-thumb-hole sleeve may require periodic repositioning. The thumb hole is integrated during knitting, so the knit structure at the thumb opening should be checked during QC for edge finishing.

Scenario 1: Industrial Safety Manager — Glass Processing Facility

A safety manager at a glass processing facility evaluating arm sleeves would typically confirm the cut rating first. The CE EN388 Cut Level 5 and ANSI/ISEA 105 Cut Grade A5 listing on this sleeve support documentation for workplace safety compliance programs. The manager would then check the 18 inch / 45 cm extended length against the tasks performed on the line — glass cutting, handling, and finishing expose the full forearm, so the extended length is a relevant factor. The fixed thumb hole keeps the sleeve positioned during reaching and lifting. The manager would confirm the 200-pair customized logo MOQ against the facility headcount, and whether the logo should be printed on the knit or applied as a woven label. Certification documentation can be requested for internal records before finalizing the order.

Scenario 2: Construction Procurement Officer — Multi-Site Crew Protection

A construction procurement officer sourcing arm sleeves for job-site crews would typically evaluate the cut rating against the materials handled — rebar, sheet metal, and sharp-edged materials require Level 5 protection. The officer would check the 18 inch / 45 cm extended length against the tasks where the forearm is exposed. The heat resistant and flame resistant features are relevant for crews working near welding or hot surfaces. The procurement officer would confirm the 500-pair threshold for customized packaging and graphic customization against the multi-site rollout plan, and whether the logo should be applied by silkscreen or heat transfer on the gray knit. The 30-day production window for orders up to 1,000 pairs should be factored into the rollout schedule, and the 0.100 kg unit weight supports economical bulk shipping to distributed sites.

Scenario 3: Institutional Procurement Officer — Regulated PPE Program

An institutional procurement officer at a government agency, university, or large manufacturer sourcing PPE would typically start with the certification documentation. The CE EN388 Cut Level 5 and ANSI/ISEA 105 Cut Grade A5 listings support documentation for regulated workplace safety programs. The officer would confirm the specific certificate format required for internal PO approval, such as a test report or declaration of conformity, and request it before finalizing the order. The 200-pair customized logo MOQ supports a program-sized order, and the 500-pair thresholds for customized packaging and graphic customization align with larger institutional buys. The officer would also confirm the production lead time of 30 days for orders up to 1,000 pairs against the program schedule and confirm billing and compliance paperwork requirements with the supplier.

Q: Can I request the CE EN388 test report before placing a bulk order?

A: The source lists CE EN388 Cut Level 5 and ANSI/ISEA 105 Cut Grade A5. Certification documentation can be provided upon request. Confirm the specific certificate format required for your internal PO approval — test report, declaration of conformity, or both — directly with the supplier before placing the order.

Q: How is the product packaged for shipping?

A: The single package size is 28 x 16 x 1 cm with a gross weight of 0.100 kg per unit. Customized packaging is available at 500 pairs minimum. For bulk orders above 1,000 pairs, sea freight is typically more economical than express.

Q: What payment terms apply to a first order?

A: Payment terms are not specified on the source page. Standard practice for this category involves a T/T deposit with the balance due before shipment. Confirm the exact terms with the supplier before placing the order. Terms may vary based on order volume and customization depth.

Q: How is the logo applied, and can it be a woven label instead of print?

A: Logo methods listed are silkscreen printing, heat transfer, washing label, and woven label. Customized logo requires a 200-pair minimum. Woven and washing labels are applied as sewn-in components rather than printed on the knit, which suits program identification and care instructions. Confirm the preferred method and placement with the supplier before production.