IP68 Solar Road Stud with Ultra Bright LED | MOQ 2 pcs

Quick B2B Sourcing Overview

• MOQ: 2 pcs (stock) | 10,000 pcs (material customization)
• Lead Time: 7 business days for 1–2 pcs
• Material: Cast aluminum housing
• Key Spec: 104×102×22mm, 315g, IP68, >800m view distance
• Decoration: Pad printing | Laser etching
• Compliance: IP68 protection rating

Attribute Data Matrix

Technical Comparison Analysis

The TYNDD2 uses a cast aluminum housing with IP68 sealing. Standard reflective road studs without LED rely on vehicle headlights for visibility and typically carry IP65 or IP67 ratings. The IP68 rating on this unit supports continuous submersion, which matters in flood-prone or low-drainage road sections where standing water is a recurring condition.

The active LED light source with solar charging eliminates the headlight dependency of passive markers. Flashing mode draws more attention at distance and runs over 108 hours on a solar charge. Steady mode runs over 24 hours and suits locations where a constant marker is preferred. The Ni-MH battery delivers over 5 years of lifespan, reducing replacement cycles compared to standard battery configurations.

Cast aluminum construction resists deformation under vehicle load better than plastic-bodied alternatives. The ENGINEER-grade reflective sheeting provides over 800m view distance in passive mode. For projects specifying long-term installation without hardwiring, the solar-powered design avoids trenching and electrical connection costs.

Multi-Scenario Buyer Applications

Highway Maintenance Contractor — A procurement manager at a road infrastructure firm evaluating solar road studs for a highway resurfacing project would typically need to confirm the IP68 rating against local drainage conditions, verify the view distance meets highway speed requirements, and check the operating temperature range against the project's climate zone. The 104×102×22mm surface-mount footprint must align with the pavement marking plan. For a project spanning multiple kilometers, the buyer would confirm the lead time for the full quantity, the packaging configuration for pallet shipping, and whether pre-shipment inspection can be arranged before the units leave the factory. Documentation for the IP68 rating and material composition would need to be included in the project submittal package.

Airport Facilities Manager — An airport operations buyer specifying taxiway edge markers would evaluate the TYNDD2 against FAA or equivalent airside marking requirements, though final compliance confirmation depends on the specific airport authority's standards. The cast aluminum housing must withstand jet blast and vehicle traffic without deformation. The IP68 rating is relevant for runway environments where standing water and de-icing fluid are common. The buyer would confirm the LED color meets airside color coding, the flashing rate is within acceptable parameters, and the battery life aligns with the airport's maintenance cycle. Packaging must protect the reflective sheeting during transport, and documentation for the material composition would be required for the airport's procurement file.

Municipal Infrastructure Procurement Officer — A city or county procurement officer sourcing road studs for an urban road safety program would typically need to verify the unit meets local road authority specifications, confirm the MOQ supports a pilot installation before full rollout, and check the lead time against the project's installation schedule. The 2-piece MOQ allows a pilot deployment on a single road segment to evaluate performance before committing to a larger order. The buyer would confirm the color options match local traffic control standards, the operating temperature range suits the regional climate, and the documentation package includes the IP68 test report and material composition certificate for the procurement file.

FAQ Matrix

Q: Can the TYNDD2 be customized with a company logo for a road safety program?

A: Yes. Pad printing and laser etching are available for branding on the housing surface outside the LED and reflective zones. Artwork should be supplied in AI or EPS vector format with CMYK color mode and 2mm bleed. Material-level customization (changing the housing material or dimensions) requires a 10,000-piece minimum. Standard pad printing or laser etching has no separate minimum beyond the stock MOQ of 2 pieces. Confirm the exact print area dimensions with the factory before artwork approval.

Q: What is the shipping process for a bulk road stud order?

A: Units ship from Beijing, China. Single package size is 20×20×15 cm at 2.000 kg gross weight. Express shipping handles samples and small batches. Sea freight moves bulk orders. Required documentation includes commercial invoice, packing list, and certificate of origin. The Ni-MH battery may require additional shipping documentation depending on carrier and destination. Confirm the HS code with your customs broker. For bulk orders, request a pre-shipment inspection report before the container is sealed.

Q: What payment terms are available for first orders?

A: Payment terms are negotiated per order. The standard structure includes a T/T deposit with balance due at a defined trigger point. Accepted payment methods and exact deposit percentage are confirmed at the time of PO. For first orders, confirm the balance trigger — whether it is against the bill of lading, pre-shipment inspection sign-off, or another milestone — before finalizing terms. Larger orders may qualify for extended payment terms.

Q: What quality checks happen before the order ships?

A: Factory QC checks each unit for LED function in both flashing and steady modes, IP68 seal integrity via water immersion test, and housing finish inspection. The Ni-MH battery charge retention is verified before final packing. Pre-shipment inspection reports can be arranged, and third-party QC sign-off is available at buyer request. For bulk orders, request the factory's defect rate report for the production run. AQL level is confirmed per order at the time of PO.