Custom Waterproof Motorcycle Cover with Lock Hole | MOQ 1 Pc

210D Polyester vs. 190T Polyester: Both are regular material options listed on the source page, and both use the same waterproof coating format. 210D is a heavier denier than 190T, which generally corresponds to a thicker fabric with greater tear resistance — a relevant factor for outdoor storage in wind or where the cover contacts rough surfaces. The 190T option is lighter, which suits buyers prioritizing packability and lower unit weight. The trade-off is between durability and weight, not waterproof performance.

Waterproof Coated Cover vs. Basic Dust Cover: A basic dust cover provides coverage without a waterproof coating, so it protects against dust and debris but not rain or moisture. This cover uses polyester with a waterproof coating and includes a lock hole for securing the vehicle while covered. The trade-off is a higher per-unit cost for the coated material and the lock hole construction.

Universal Fitment vs. Model-Specific Cover: The universal fitment design covers a range of motorcycles, bicycles, mountain bikes, and motocross bikes across sizes M through 4XL. A model-specific cover may offer a closer fit on a particular vehicle but requires a separate SKU per model. The trade-off is that a universal cover may not fit as tightly on every vehicle, so buyers should confirm the size mapping for their specific models before ordering.

Scenario 1: Motorcycle Accessory Retail Buyer — Outdoor Protection Range

A motorcycle accessory retail buyer sourcing waterproof covers for an outdoor protection range would typically confirm the material grade first. The source lists two regular polyester options — 190T and 210D — with the 210D representing the heavier tier for buyers whose customers ride in harsher conditions. The buyer would then check the size range, M through 4XL, against the store's customer base and confirm the size mapping for common motorcycle models. The lock hole is a practical feature for customers who want to secure the bike while covered, and the buyer would confirm its position on the cover for marketing photos. OEM and ODM are supported for custom logo, so the buyer can build a private-label line. The 8-day lead time for a single-piece order supports a sample evaluation before committing to a full range buy, and BSCI is listed in the source for vendor documentation.

Scenario 2: Fleet and Rental Operations Manager — Vehicle Storage Protection

A fleet and rental operations manager sourcing covers to protect stored motorcycles and bicycles would typically evaluate the waterproof performance and material durability first. The polyester waterproof coating handles rain and moisture, and the 210D option offers heavier tear resistance for fleet use where covers are handled frequently. The manager would check the universal fitment against the fleet's vehicle mix — motorcycles, bicycles, mountain bikes, and motocross bikes are all listed as applications — and confirm the size mapping for each. The lock hole is a relevant feature if the fleet secures bikes while covered. The manager would confirm the production schedule for a bulk order, since the lead time table shows 8 days for 1 piece and negotiated terms above that, and would factor in shipping transit. The single package size of 32 x 32 x 8 cm supports warehouse storage planning.

Scenario 3: E-Commerce Seller — Private-Label Outdoor Cover Launch

An e-commerce seller launching a private-label motorcycle cover would typically start with a sample order at the single-piece tier, which lists an 8-day lead time. The sample lets the seller evaluate the waterproof coating, lock hole finishing, and foldable construction before committing to a bulk run. The seller would then confirm the custom logo placement with the supplier, making sure the design avoids the lock hole and fold lines. The two material options — 190T and 210D — give the seller a choice between a lighter and a heavier product tier, which can be used to build a two-SKU product line or to position one option as the primary listing. The single package size of 32 x 32 x 8 cm and the source-listed gross weight should both be verified with the supplier for shipping cost calculations, since the 68.000 kg figure on the source page appears unusually high for a single cover.

Q: What is the BSCI certificate scope, and can I request the audit report?

A: BSCI is listed as a certificate on the source page. Buyers should request the audit report directly from the supplier and confirm the scope, factory name, and validity date against their compliance program. Confirm the specific documentation format required for your internal PO approval before finalizing the order.

Q: How is the product packaged for shipping?

A: The single package size is 32 x 32 x 8 cm. Custom packing is supported. The source lists a single gross weight of 68.000 kg, which buyers should verify with the supplier as it appears unusually high for a single cover unit. For bulk orders, sea freight is typically more economical than express.

Q: What payment terms apply to a first order?

A: Payment terms are not specified on the source page. Standard practice for this category involves a T/T deposit with the balance due before shipment. Confirm the exact terms with the supplier before placing the order. Terms may vary based on order volume and customization depth.

Q: Can I select 190T or 210D polyester for the same order, or is it one material per run?

A: Both 190T and 210D are listed as regular material options. Confirm with the supplier whether a single order can include both material grades or whether each grade requires a separate run. Material is also listed as a customization option, so a specific grade can be specified during the order process.