Custom LED Bike Wheel Light | Valve Spoke Light | MOQ 100

Quick B2B Sourcing Overview

• MOQ: 100 pcs
• Lead Time: 15 days (1–50 pcs) | 35 days (51–1,000 pcs) | >1,000 pcs negotiated
• Type: LED wheel light, battery power supply
• Key Spec: 0.015 kg gross; 12×8.2×4 cm package; red / green / blue / yellow
• Customization: Packaging from 1,000 pcs | +$50/piece add-on
• Compliance: CE, ROHS, FCC named in source

Attribute Data Matrix

Technical Comparison Analysis

Compared against a passive reflector, this LED valve light adds active illumination and a choice of four colors — red, green, blue, and yellow — that a passive reflector cannot provide. That active light source is what draws attention at night, which matters for both cycling visibility and promotional giveaways. The trade-off is complexity: a battery power source introduces transport documentation requirements (UN38.3 for air freight) that a passive reflector does not carry. Cost also runs higher for an LED unit, driven by the emitter, battery contact assembly, and housing seal rather than packaging.

Against a rechargeable wheel light, this product sits below on published performance data: run time, output lumens, and battery capacity are not stated in the supplier listing. It compensates with a lower base MOQ (100 pcs vs. the higher minimums typical on rechargeable LED products) and named CE, ROHS, and FCC certification. Documentation can be provided for your destination market's requirements — certificate numbers are not shown in the supplier listing and should be requested before quoting.

Multi-Scenario Buyer Applications

Scenario 1: Cycling Event Organizer

A race operations lead evaluating LED wheel lights for participant packets would first confirm color options — the source lists red, green, blue, and yellow, which supports color-coded routes or club identity. Decoration is the next decision: below 1,000 pieces, the light ships in stock packaging, so branding needs a separate hangtag or sticker; at 1,000 pieces, packaging customization unlocks with a $50 per piece add-on. Timeline is the gate — the 15-day window only covers orders up to 50 pieces, while anything from 51 to 1,000 pieces runs 35 days. For a race ten weeks out, both windows are workable. For a race four weeks out, only the sample-tier 15-day window applies. Pre-shipment photo documentation confirms LED function and color output before release.

Scenario 2: Bike Shop Owner

A bike shop owner restocking LED wheel lights as a counter accessory would weigh the 100-piece MOQ against typical retail sell-through. The 100-piece entry point makes a first stock order low-risk, and the four color options let the shop display a full color range from one SKU. Branding at the shop level usually means a printed shelf tag or a sticker applied in-store rather than custom packaging, so the 1,000-piece packaging minimum is rarely the right tier for a single shop. What the shop owner does need to confirm is the battery type and run time — neither is published in the supplier listing, so a sample unit is worth ordering before committing. The 15-day lead time for up to 50 pieces supports a test order in two weeks.

Scenario 3: Promotional Merchandise Distributor

A promotional merchandise distributor sourcing branded cycling accessories for client campaigns would first confirm certification coverage — CE, ROHS, and FCC are named, which covers EU and US market entry. Battery-powered goods need transport documentation (UN38.3 for air), so the distributor would request that before quoting a client. Packaging is the branding lever here: at 1,000 pieces and above, custom header cards or branded retail boxes turn a generic LED light into a client-branded item. The distributor would confirm artwork lead time, sample cost, and whether the packaging add-on ($50 per piece at 1,000 pcs) is per-unit or per-design. For a client with a tight timeline, the 35-day window for 51–1,000 pieces is the operative tier to plan around.

FAQ Matrix

Q: Can I get a working sample of the LED light before committing to a bulk order?
A: Yes. Request a sample unit with your desired color configuration. The 15-day lead time tier applies to orders up to 50 pieces, so a small sample run fits within that window. Confirm the sample cost and whether it is credited against the bulk order before committing.

Q: How are the LED lights shipped, and what are the carton specs?
A: Single package is 12×8.2×4 cm at 0.015 kg gross. Packing is set to customer request, so carton configuration is determined at order stage. Battery-powered goods may require UN38.3 documentation for air freight — confirm this before booking. Master carton quantity and pallet configuration are not specified in the supplier listing; confirm before booking freight.

Q: What payment methods are accepted, and what are the terms?
A: Payment terms are not specified in the supplier listing. Standard cross-border practice for a first order is a T/T deposit against the PO with the balance due on pre-shipment inspection approval. Confirm deposit percentage, balance trigger, and accepted methods directly before committing.

Q: What quality checks happen before shipment?
A: The supplier listing does not publish an AQL level or inspection policy. Specify your AQL target in the PO — AQL 2.5 is common for small electronics. Request pre-shipment photo documentation covering LED function and color output, battery contact integrity, housing seal, and unit weight verification against the 0.015 kg spec.