What are the specific yarn counts and linear mass density tolerances for the 13-gauge blended yarn?

The work gloves are knitted using a 13-gauge circular needle bed, processing a ring-spun blend of 65 percent cotton and 35 percent polyester continuous filament. The yarn count operates at 20s single yarn, yielding a linear density of approximately 30 tex per end. This configuration achieves an optimal balance of dexterity and tensile strength, with a stitch density of 13 courses per inch. The cotton-polyester ratio is calibrated to provide moisture absorption on the interior skin contact surface while maintaining abrasion resistance on the exterior face.

What are the technical limits of liquid absorption and heat shrinkage tolerances for cotton-polyester yarn blends?

The blended textile absorbs up to 15 percent of its dry weight in aqueous fluids before saturation occurs. The thermal shrinkage tolerance is restricted to within 4 percent when subjected to industrial laundering cycles at 60 degrees Celsius. Due to the absence of a synthetic or rubberized palm dip, dynamic friction coefficients rely entirely on the natural pile of the knit yarn, registering approximately 0.4 on dry steel surfaces. Open flame exposure is not recommended as synthetic components soften at 160 degrees Celsius.

How are dynamic production scaling, tiered setup deductions, and size run splits handled in bulk manufacturing batches?

Mass production scaling requires a baseline lot of 6,000 pairs to stabilize automated knitting machinery tensions and yarn feed rates. Size runs spanning 19cm to 24cm total length are segregated into 1,000-pair sub-batches to facilitate sorting. Tooling adjustments for custom cotton-polyester blending ratios necessitate an inline yarn changeover, which is optimized for orders exceeding 10,000 pairs. Order modifications must be registered prior to the knitting cycle to avoid waste.

What statistical AQL defect checkpoints and pre-shipment quality verification protocols apply to knitted utility gloves?

Quality inspection protocols adhere strictly to ISO 2859-1 single sampling plans at an Acceptable Quality Limit of 2.5 for major structural faults, including dropped stitches, uneven cuff elastic tension, or yarn breakage. Minor cosmetic variations such as protruding thread ends under 5mm are held to a 4.0 AQL limit. Pre-shipment verification involves automated weight checks on sampled pairs to ensure conformity within a 30g to 80g mass range, alongside physical stretch testing on the wrist cuffs.

What are the cross-border intermodal customs compliance measures, HS code classifications, and master packing safety protocols for overseas shipping?

Cotton knit work gloves fall under the Harmonized System tariff code 6116.92.0000 for gloves, mittens and mitts, knitted or crocheted, of cotton. International export clearance requires formal declaration of the exact fiber blend ratio and country of origin labeling on master cartons. Inner packaging consists of 12 pairs sealed in a moisture-resistant PE liner. These bundles are packed in double-wall corrugated cartons with a 250-lb burst rating, strapped onto pallets to prevent crushing during intermodal ocean transit.

# Custom Branded Kits for Bulk Orders – How Can i Create Personalized Kits for Your Brand? # Custom Industrial Storage & Organization – How Can You Optimize and Brand Your Warehouse Solutions? # Custom Safety & Workwear for Bulk Orders – How Can You Brand Protective Gear for Your Team? # Custom Work Gloves for Industrial & Construction Teams – How Can Personalized Gloves Improve Safety and Brand Presence? # Custom Hats & Caps & Socks & Gloves & Towels # Custom Workwear & Uniforms # Corporate Gifts # Custom Branded Items # Promotional Giveaways # Trade Show Giveaways # Industrial & Work Supplies & Hardware – How Can Customized Tools and Equipment Improve Your Business Efficiency?

Custom Cotton Knit Work Gloves – Breathable, Anti-Slip & Cut Resistant for Safety & Labor

Name: Custom Cotton Knit Work Gloves – Breathable, Anti-Slip & Cut Resistant for Safety & Labor
Brand: SupplyBatch
SKU: 104305776164
Price: 0.11 USD
Availability: InStock

1 reviews

low as: $0.11

material Polyester Cotton

size ONE SIZE FITS ALL

Type General Purpose Work Gloves Clean Room Gloves

Request a Wholesale Quote:

(Kindly fill below form for quote in 5min or enquiry)

⚠️ You've already submitted a quote for this product.

✓ Your enquiry has been sent successfully! We'll reply with a quote shortly.

Work gloves that actually breathe

If your team complains about sweaty hands or flimsy gloves that rip after a week, try these. They're cotton knit – breathable, flexible, and surprisingly tough. Anti-slip coating means boxes and tools stay put. Cut resistance handles sharp edges. And anti-static properties protect sensitive electronics.

These aren't heavy-duty welding gloves. They're for warehouses, assembly lines, light construction, shipping docks, and maintenance crews. The kind of work where you need dexterity and protection without turning your hands into oven mitts.

Materials & build: simple but smart

Made from a cotton/polyester blend – cotton for comfort, polyester for durability and shape retention. The knit construction makes them stretchy and breathable. No thick rubber or plastic coatings that trap heat.

You can choose from three gauges: 7g (thicker, more durable), 10g (standard all-purpose), or 13g (finer, better dexterity). Weight ranges from 30g to 80g per pair. Lighter gloves are more breathable; heavier ones offer more padding and protection.

Protection features: what they actually do

🛡️ Anti-slip – Grip coating or textured knit prevents boxes, tools, and parts from sliding.
✂️ Cut resistant – Not chainmail-level, but good for light sharp edges like cardboard, plastic trim, or sheet metal edges.
⚡ Anti-static – Reduces static buildup. Important for electronics assembly or environments with sensitive components.
💨 Breathable – Cotton knit lets air circulate. Hands stay drier and more comfortable over long shifts.

Customization: make them yours

🎨 Color – Any color you want. Match your brand or use high-vis for safety.
⚖️ Weight – 30g to 80g per pair. Lighter for dexterity, heavier for durability.
📏 Length – 19cm to 24cm. Longer cuffs for more wrist coverage.
🔢 Gauge – 7, 10, or 13. Thicker or finer knit.
🏷️ Logo printing – Available at 100,000 pairs. Screen print or heat transfer.
📦 Custom packaging – Also at 100,000 pairs. Branded boxes or polybags.

Pricing & MOQ breakdown

6,000–59,999 pairs – ~$0.07–0.08 per pair (standard MOQ tier)
60,000–299,999 pairs – ~$0.06 per pair, good for larger warehouses or multi-site orders
300,000+ pairs – ~$0.05 per pair, best for national distributors or annual contracts
100,000 pairs – MOQ for custom logo or custom packaging

All prices in USD. Free sample available (you pay shipping).

Who buys these?

📦 Warehouse managers – for picking, packing, sorting
🏗️ Construction site supervisors – light duty, material handling
⚙️ Manufacturing plant procurement – assembly lines, quality check
📱 Electronics facilities – anti-static for component handling
🧹 Janitorial and maintenance – grip and dirt protection
🌱 Landscaping crews – durable and washable

Free samples – no catch

You can request one free sample pair. Just pay the shipping cost. That way you can test the fit, feel, and durability before ordering thousands. Many suppliers charge for samples. These are free because they're confident you'll like them.

CE certification – what it means

CE marking means these gloves meet EU safety, health, and environmental protection standards. If you're shipping to Europe or working with EU regulations, this matters. It covers the anti-slip, cut resistance, and anti-static claims.

Lead time & shipping

Production takes 25–35 days from order confirmation and artwork approval (if custom). Shipping options:

🚢 Sea freight – 20–40 days, cheapest for large volumes (FOB from Chinese ports)
✈️ Air freight – 5–10 days, good for medium urgent orders
📦 Express (DHL, UPS, FedEx) – 3–7 days, best for samples or small urgent shipments

Quick specs at a glance:
Material: Cotton/polyester blend (customizable)
Weight: 30–80g per pair (30–60g typical)
Gauge: 7, 10, or 13
Length: 19–24cm
Features: Anti-slip, cut resistant, anti-static, breathable
Certifications: CE
MOQ (no logo): 6,000 pairs
MOQ (logo): 100,000 pairs
Sample: Free (pay shipping)
Lead time: 25–35 days
Origin: Hunan, China

All prices in USD. Free sample available. Shipping calculated per order. FOB from Chinese ports.

SupplyBatch · Custom Sourcing Solutions

What Is the Minimum Order Quantity?6000 ·units Who This Product Works Best For?Warehouse and distribution center managers

Construction site supervisors

Manufacturing plant procurement

Safety equipment distributors

Electronics assembly facilities (anti-static needs)

Janitorial and maintenance teams

Small business owners needing team gear

Promotional safety product buyers (large logo orders) Where and How It's Made?

The primary cotton and polyester staple fibers originate from agricultural and petrochemical processing zones in Jiangsu and Shandong provinces, an industrial ecosystem known for textile spinning. The raw yarns are carded and spun to ensure uniform tension, which prevents premature fraying along the finger seams when the gloves are subjected to repetitive warehouse handling tasks.

Material integrations involve twisting the cotton and polyester filaments into specific blend ratios on circular knitting carousels. These machines control the 7, 10, or 13-gauge knit structure, resulting in a breathable textile that conforms to variable hand shapes. The elasticated wrist cuffs are reinforced with hidden latex-free rubber threads to keep the openings from stretching out during rigorous daily shifts.

Manufacturing facilities maintain ISO 9001 quality management certifications and undergo independent social responsibility audits. The production floors utilize automated knitting machinery that links the fingers and cuffs inline, reducing manual assembly errors. Operators verify glove weights using digital scales to ensure compliance with density metrics before items proceed to the sorting tables.

Environmental sustainability benchmarks focus on utilizing reactive dyes that require less water during the coloring phase, as well as recycling yarn waste for industrial padding. The packaging line avoids expanded polystyrene sheets, opting for unbleached corrugated boxes that reduce landfill impacts. This supply chain flow yields rugged utility gear while managing industrial waste.

What You Need to Know?Custom cotton knit work gloves. Breathable, anti-slip, cut resistant, anti-static. CE certified. Free samples. MOQ 6,000 pairs (non-logo). Custom weight, length, gauge, color. Logo printing at 100,000 pairs.

These cotton knit work gloves are what you want when you need something better than basic. They’re breathable, so hands don’t feel like they’re in a sauna after an hour. Anti-slip grip means boxes and tools don’t slide around. And the cut-resistant and anti-static features add real protection without making the glove stiff.

You can get them in any color, any weight from 30 to 80 grams, and any length from 19 to 24cm. Choose between 7, 10, or 13 gauge – finer gauge means more dexterity. And if you need custom logo printing, that’s available at 100,000 pairs. Smaller order? No problem – standard gloves start at 6,000 pairs.

Free samples are available, so you can see if the fit and feel work for your team before placing a big order. CE certified too, so they meet EU safety standards.

Why Companies Choose This Product? Free samples – test before you commit

CE certified – meets EU workplace safety standards

Customizable: weight, length, gauge, color, logo

Breathable knit – comfortable for all-day wear

Multi-protection: anti-slip, cut resistant, anti-static

Competitive pricing at volume (as low as ~$0.05/pair at 300k+)

OEM/ODM friendly

Flexible for light to medium duty work

Is This the Right Choice for Your Business? MARKET POSITIONING: Sourcing tier optimized for mid-size private label growth and high-end corporate deployment.

PRICE BENCHMARK: Achieves an estimated 40% reduction in total unit economics compared to ordering through domestic safety equipment brokers.

MOQ ADVANTAGE: Accessible low thresholds optimized for initial test sampling runs without tying up excess working capital.

How Businesses Use This Product? Warehouse picking and packing – breathable and anti-slip

Light construction and carpentry – cut resistance helps

Assembly line work – flexible knit allows dexterity

Electronics manufacturing – anti-static protection

Gardening and landscaping – durable and washable

General maintenance – oil and dirt grip

Promotional safety kits for trade shows (with custom logo)

Materials, Construction & Specifications

MATERIAL PRIMARY: Ring-spun 65% cotton / 35% polyester blended yarn.

STANDARD DIMENSIONS: Graded scale ranging from 19cm to 24cm total length, matching standard utility hand sizes.

WEIGHT PER UNIT: Varies between 30 grams and 80 grams per pair depending on gauge thickness.

SURFACE TREATMENT: Textured yarn finish suitable for general handling grip applications.

DIMENSIONAL TOLERANCE: Plus or minus 5mm variance along finger length and cuff parameters under normal tension.

Manufacturing Details

Material: Cotton/polyester blend (customizable)

Weight range: 30–80g per pair (30–60g typical for light duty)

Gauge options: 7g, 10g, or 13g (finer knit = more dexterity)

Length: 19–24cm (customizable)

Color: any custom color available

Features: anti-slip, cut resistant, anti-static, breathable, flexible

Packaging: carton or woven bag

Certifications: CE certified (EU safety standard)

Sample policy: free samples available (customer pays shipping)

Packaging, Carton & Shipping Details

INNER PACKAGING: Bundled in lots of 12 pairs, nested inside a moisture-proof LDPE polybag to prevent dust collection and humidity absorption during ocean transit.

MASTER CARTON: Heavy-duty double-wall corrugated export carton rated for 15kg load limits, measuring roughly 50cm x 40cm x 40cm, containing exactly 600 pairs to standardize shipping footprints.

PALLET SPEC: 110cm x 110cm fumigated wooden pallet base, stacked up to four layers high, secured with plastic stretch wrap and vertical edge protection boards.

REQUIRED DOCUMENTATION: Commercial Invoice, Packing List, Certificate of Origin, Transit Safety Inspection Record, Bill of Lading.

How Much Should You Order?

Ideal for warehouse operators, construction crews, assembly lines, logistics centers, and any workplace needing basic hand protection. Works for both one-off bulk buys and ongoing supply contracts.

Order Quantities & Volume Options

6,000 pairs – standard MOQ for non-logo gloves 60,000 pairs – better price break (~$0.06/pair) 300,000+ pairs – best bulk pricing (~$0.05/pair) 100,000 pairs – MOQ for custom logo or custom packaging Free sample available (one pair, pay shipping)

Production Schedule & Lead Time

25–35 days (depends on quantity and customization level)

Questions Buyers Often Ask

Q: I need durable work gloves for my warehouse team. Are these strong enough? Warehouse inventory handling, general logistics fulfillment, construction site labor, farm and garden chores, shipping dock packing supplies

A:

Yeah, these are cotton knit with anti-slip and cut-resistant features. They’re breathable too, so workers don’t get sweaty hands. Good for general assembly, packaging, light construction.

Q: Can I get a free sample before ordering 6000 pairs?

A: Yes, free samples are available. You just pay shipping. That way you can test the fit and quality first.

Q: What customization options do you have for work gloves?

A: You can change the color, weight (30–80g), length (19–24cm), and gauge (7, 10, or 13). Also logo printing and custom packaging for large orders.

Q: Are these gloves anti-static?

A: Yes, they have anti-static properties. Also anti-slip and cut resistant. Good for electronics assembly or environments where static is a concern.

Q: What’s the MOQ for custom logo?

A: Logo printing requires 100,000 pairs. That’s for large-scale branded programs. If you need fewer, you can still get standard gloves without logo at lower MOQ.

Q: Do you have CE certification?

A: Yes, these gloves are CE certified – meets EU safety standards.

Q: Can I mix sizes in one order?

A: These come in one size fits most. But if you need different specs (length, weight), that’s considered custom and may affect MOQ.

Why SupplyBatch

Real Craftsmanship, Small-Batch Ready

We don’t just chase scale; we care about the details. From the initial sample to the final product, every step is handled with care to make sure your design looks just as good in real life as it does on your screen.

At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive.

Quality Checked & Shipped Right

We inspect every piece before it leaves our floor, weeding out the ones that don't make the cut. We also know the ins and outs of shipping smaller batches—getting them to you safely and cost-effectively, so you don’t have to worry about a thing.

You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.

Customization with Brand Services

Customization with a Personal Touch

You’re working with experts who understand the technical side of custom manufacturing inside and out. We don’t just process orders; we act as an extension of your team. Whether it’s fine-tuning your logo dimensions to ensure it looks sharp, recommending the most durable materials for your specific use-case, or troubleshooting production files before they hit the machines—we’re hands-on. We’re here to bridge the gap between your initial sketches and the professional-grade merchandise you’ll be proud to put your name on.
At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive. You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.