ABS Safety Helmet Construction | 4-Point Suspension Custom Logo | 410g

Quick B2B Sourcing Overview

MOQ: Flexible — request quote | Lead Time: 5-15 business days | Material: ABS | Weight: 410g | Suspension: 4-point with knob adjustment | Head Circumference: 53-62cm | Colors: Red, Yellow, White, Blue

Attribute Data Matrix

Technical Comparison Analysis

ABS vs. HDPE Safety Helmets:

This helmet uses ABS material—providing superior impact resistance compared to HDPE (High-Density Polyethylene) helmets commonly used in construction. ABS is tougher, more rigid, and offers better protection against high-impact forces. The three-rib reinforced design adds structural integrity. HDPE helmets are lighter and less expensive but offer lower impact resistance. ABS helmets are better suited for construction and industrial applications where higher impact protection is required. The 410g weight provides a balance of protection and comfort. For construction sites with overhead hazards, ABS helmets provide better protection against falling objects.

4-Point vs. 6-Point Suspension Systems:

This helmet uses a 4-point suspension system with knob-type adjustment. 4-point suspensions provide secure fit and comfort for most applications. 6-point suspensions offer more even weight distribution but are heavier and more expensive. The 4-point system with knob adjustment allows easy headband sizing (53-62cm) for quick fitting. For construction and industrial applications, the 4-point system provides adequate protection and comfort while keeping weight manageable (410g).

Multi-Scenario Buyer Applications

Scenario 1: Construction Safety Manager — Commercial Building Project
A construction safety manager needed 200 ABS safety helmets for a 40-story commercial building project. The manager required custom color (yellow) for site visibility and custom logo printing with the company name on the front. The 10-day lead time at the 51-300 piece tier allowed the helmets to arrive before the project start. The 4-point suspension system with knob adjustment provided quick fitting for the diverse workforce. The 53-62cm head circumference range accommodated all crew members. The breathable slotted design improved comfort during summer construction. The construction company reordered at 300 helmets for the next phase of the project.

Scenario 2: Industrial Procurement Officer — Manufacturing Facility Safety Program
An industrial manufacturing facility needed 300 ABS safety helmets for a factory-wide safety program. The procurement officer required custom color (blue) to match the facility's safety color-coding and custom logo printing on the front. The 10-day lead time allowed the helmets to arrive before the annual safety audit. The ABS material with three-rib reinforced design was selected for superior impact protection. The 4-point suspension system provided comfort for workers wearing helmets for full shifts. The facility reordered at 500 helmets annually as part of the ongoing safety program.

Scenario 3: Safety Equipment Distributor — Multi-Client Inventory Program
A safety equipment distributor needed 500 ABS helmets for inventory to serve multiple construction and industrial clients. The distributor required a mix of colors (Red, Yellow, White, Blue) for different client requirements and custom logo printing capabilities. The 15-day lead time allowed the distributor to receive the helmets before the construction season. The 30pcs/CTN packaging was efficient for warehouse storage. The distributor established a quarterly reorder program, maintaining inventory of all four color options to serve diverse clients.

FAQ Matrix

Q: Can I order a sample with my custom logo and color, and how long does it take?
A: Yes, sample orders with custom logo and color are available. The sample lead time is 7-10 business days. The sample cost is deducted from your bulk order after confirmation. We recommend ordering a sample to verify the ABS material, 4-point suspension fit (53-62cm), and print quality before scaling. For national standard compliance verification, we recommend requesting test reports with the sample.

Q: What is the estimated shipping weight and volume for a 300-piece order?
A: Each unit has a gross weight of 0.41 kg. A 300-piece order weighs approximately 123 kg. Packing is 30pcs/CTN with carton dimensions 83x69x31 cm—10 cartons for 300 pieces. Express shipping is recommended for up to 300 units; sea freight LCL becomes more economical for larger volumes. We confirm the final packed dimensions at the production stage before shipping.

Q: What is the per-unit cost for custom logo printing, and what are the color options?
A: Custom logo printing is available—discuss specific artwork and quantity requirements with the supplier at quoting stage. Color options include: Red, Yellow, White, Blue, and custom colors available. The cost depends on the printing complexity and quantity. Lead time for custom orders is 5-15 days depending on quantity.

Q: What QC checks happen before my order ships, and can I request a third-party inspection?
A: Standard QC includes material integrity testing, suspension system verification (4 points), head circumference testing (53-62cm), and visual inspection. We apply AQL 1.5 for critical defects (material cracks, suspension failure, incorrect fit) and AQL 2.5 for minor defects (slight color variation, surface scuffs). Defective units are reworked. We can arrange third-party QC inspections at your cost—costs vary by inspection scope and agency. For SupplyBatch direct orders, we provide a free photo report showing random samples from the completed batch before release.