What material and compliance documentation can be confirmed for this double wall paper cup?

The cup body is coated paper with 14gsm-20gsm PE coating, single or double side, in a double wall construction. The source lists the feature as food grade and names PE coating to prevent oil and water. No certificate numbers or issuing labs are shown, so documentation available upon request is the correct procurement baseline. Before PO approval, request the food-grade test reports the supplier holds for the paper stock and the PE coating, confirm the standard each was tested against for your destination market, and record the documentation status in the approval file.

What decoration constraints apply to a custom logo on this paper cup?

The source lists offset printing and flexographic printing with food-grade ink. Customization options include pattern, logo, text, and QR code. The source does not state maximum color count or print area dimensions, so confirm them at quotation. MOQ is 5,000 pcs. Offset printing suits detailed multi-color artwork; flexo suits higher-volume solid designs. The cup diameter is 90 mm (3.54 in), which sets the usable print band. Request a decorated sample and check print registration and ink adhesion on the coated paper before bulk approval.

How does the MOQ structure map to the production timeline?

The source lists MOQ 5,000 pcs. Lead time is 15 days for 1-1 piece, with above 1 to be negotiated — that table is likely a data-entry artifact, so treat the 15-day figure as indicative only and request the production window for your specific quantity at quotation. Sizes run 4 oz to 24 oz, or the size you need. For a first 5,000-piece logo order, confirm the production window in writing before deposit rather than relying on the lead-time table as printed.

What quality control checkpoints should be written into the purchase order?

The source does not name an AQL level or a third-party inspection agency, so both should be specified in the purchase order. Key checkpoints for a double wall paper cup: PE coating coverage and seam integrity, lid fit against the specified lid type, double wall bonding, rim and base integrity, print registration with food-grade ink, and dimensional consistency against the 90 mm diameter and the specified capacity (4 oz to 24 oz). Confirm pre-shipment photos and inspection scope in writing.

How is the order shipped and what import documentation applies?

Selling units are single item, with accessories listed as cup lid, cup sleeve, cup holder, and straw — confirm which are included versus quoted separately. Single package size and gross weight are not stated — request both at quotation. Shipment mode and freight terms are also not stated. Standard export documentation includes commercial invoice, packing list, and certificate of origin. For a food-contact drinkware item, request the food-grade test documentation for your destination market as product-specific paperwork. HS code and duty rate are not specified — confirm with a customs broker.

Custom Paper Cups with Logo — 12oz Double Wall Coffee Cup

Name: Custom Paper Cups with Logo | 12oz Double Wall MOQ 5000
Brand: SupplyBatch
SKU: 10001298692882
Price: 0.06 USD
Availability: InStock

B2B Sourcing Overview

MOQ: 5,000 pcs
Lead Time: 15 days listed for 1-1 pcs; above 1 to be negotiated — confirm for your quantity
Material: Coated paper with 14gsm-20gsm PE coating
Style: Double Wall
Diameter: 90.0 mm (3.54 in)
Sizes: 4 oz to 24 oz, or the size you need
Printing: Offset or flexo printing with food-grade ink
Customizable: Pattern, logo, text, QR code
Accessories: Cup lid, cup sleeve, cup holder, straw
Application: Coffee shop, milk tea shop, restaurant, cinema
Compliance: Documentation available upon request

Attribute Data Matrix

Attribute	Specification	Notes
Material	Coated paper with 14gsm-20gsm PE coating	Single or double side coating
Style	Double Wall	Insulation per source
Diameter	90.0 mm (3.54 in)	—
Sizes	4 oz, 8 oz, 12 oz, 16 oz, 20 oz; 4 oz to 24 oz or size you need	≈118 ml to ≈591 ml listed
Printing	Offset or flexo printing with food-grade ink	Pattern, logo, text, QR code
Features	Waterproof, Eco-Friendly, Durable, Food Grade, Disposable, Recyclable	PE coating prevents oil/water
Paper Type	Coated Paper	—
Accessories	Cup lid, cup sleeve, cup holder, straw	Confirm what's included vs quoted separately
Application	Coffee Shop, Milk Tea Shop, Restaurant, Cinema	—
MOQ	5,000 pcs	—
Lead Time	15 days listed for 1-1 pcs	Above 1 negotiated — confirm for your quantity
Place of Origin	Zhejiang, China	OEM brand

Technical Comparison

Against a single wall paper cup, the double wall construction provides insulation that a single wall cup does not, which matters for hot coffee and tea service where the cup is held directly. A single wall cup is lower in unit cost and lighter to ship, but typically requires a sleeve for hot drinks. For a coffee shop program where the cup is the customer-facing container, the double wall format reduces the sleeve dependency.

Against a plastic cup, the paper cup with PE coating handles hot beverages and offers a different hand feel. Plastic is more transparent and shows the drink, but is not typically used for hot coffee service. Documentation can be provided for your destination market’s requirements — no certifications are named on the source page, and food-grade test reports for the paper stock and PE coating should be requested for the order lot.

Buyer Applications

A coffee shop chain buyer sourcing branded double wall cups for hot coffee service would typically confirm three things before quoting: the 12 oz or 16 oz size against the standard drink menu, the lid type and whether it is included versus quoted separately, and the print method against the artwork. Offset printing suits detailed multi-color logos and QR codes; flexo suits solid designs at higher volume. The 5,000-piece MOQ fits a single-location pilot. The buyer would request a decorated sample before the bulk run, confirm the production window in writing since the lead-time table is not reliable as printed, and request the food-grade test reports for the order lot.

A milk tea shop or beverage brand buyer sourcing branded cups for milk tea and fruit tea service would focus on the double wall insulation for hot drinks, the size range from 4 oz to 24 oz, and the PE coating for oil and water resistance. The QR code customization option supports a loyalty or social campaign. The buyer would confirm the diameter (90 mm) against the existing lid inventory, request a decorated sample before the bulk run, and agree defect criteria in the purchase order, since the source page does not name an AQL level.

A cinema concessions buyer sourcing branded cups for beverage service would map this cup to hot and cold beverage menu items. For the cinema program, the 5,000-piece MOQ and the cup lid, sleeve, holder, and straw accessories give a full-service option. The buyer would confirm which accessories are included versus quoted separately, request a decorated sample before the bulk run, and confirm the production window for the quantity band. The double wall construction reduces the need for a separate sleeve on hot items.

FAQ Matrix

Q: Can I order a sample before committing to the 5,000-piece minimum?
A: The source lists samples as available. Request a sample at quotation and confirm sample cost and whether it is credited against the bulk order. Test the PE coating coverage and lid fit on the sample before approving.

Q: How is the order packed and shipped?
A: Package size and gross weight are not stated in the source — request both at quotation. Shipment mode and freight terms are also not stated. Confirm the production window for your quantity in writing, since the lead-time table as printed is not reliable.

Q: What payment structure applies?
A: Payment terms are not listed on the source page. The confirmed commercial terms are a 5,000-piece MOQ, a 90 mm diameter, and sizes from 4 oz to 24 oz. Deposit and balance terms should be agreed in the purchase order.

Q: What compliance documentation can be provided?
A: No certifications are named on the source page. Documentation for your destination market is available upon request. For a food-contact drinkware item, request the food-grade test reports the supplier holds for the paper stock and PE coating, confirm the standard each was tested against, and record the documentation status before production begins.

SupplyBatch · Custom Sourcing Solutions

What Is the Minimum Order Quantity?5000 ·units Who This Product Works Best For?Coffee Shop Chain Buyer at a coffee chain — sourcing branded double wall cups for hot coffee and tea service
Milk Tea Shop Buyer at a milk tea chain — sourcing branded paper cups for milk tea and fruit tea service
Restaurant Buyer at a restaurant group — sourcing branded cups for takeout beverage service
Cinema Concessions Buyer at a cinema chain — sourcing branded cups for beverage concessions
Marketing Director at a beverage brand — sourcing branded cups for a seasonal promotion or campaign
E-commerce Merchandising Manager at a foodservice supplies brand — sourcing branded cups for order fulfillment
Hotel and Hospitality Buyer at a hotel group — sourcing branded cups for banquet and in-room beverage service
Category Manager at a foodservice distributor — sourcing branded cups for a restaurant and cafe client base Where and How It's Made?

These double wall paper cups are manufactured in Zhejiang, China, by an OEM supplier. The cup body is coated paper with 14gsm-20gsm PE coating, single or double side, and the double wall construction provides insulation for hot and cold drinks.

Key features include waterproof, eco-friendly, durable, food grade, and PE coating to prevent oil and water. The cup diameter is 90.0 mm (3.54 in). Capacities run from 4 oz to 24 oz, or the size you need. Accessories include cup lid, cup sleeve, cup holder, and straw. Printing methods are offset printing and flexographic printing with food-grade ink.

The source lists food grade among its features. No certificate number or named standard is shown, so request the food-grade test reports the supplier holds for the paper stock and PE coating, confirm the standard each was tested against, and record the documentation status in the approval file before relying on the feature descriptor.

Environmental or quality-management certifications beyond the recyclable feature listing are not stated in the source. Buyers should verify current audit status and material test reports during onboarding.

What You Need to Know?The most consequential choice on this cup is the print method, not the capacity. Offset printing suits detailed multi-color logos and QR codes; flexo printing suits higher-volume solid designs at lower cost per cup. Both use food-grade ink per the source, so the choice is about artwork complexity and run length, not compliance.

On quantity, the 5,000-piece MOQ sets the entry point, and the source does not state a reliable production lead time — the lead-time table lists 15 days for 1-1 piece with above 1 to be negotiated, which is a data-entry artifact rather than a schedule. Request the production window for your actual quantity in writing before deposit.

The third decision point is the PE coating: 14gsm-20gsm, single or double side. Double-side coating adds barrier on both faces; single-side coating is the standard for a hot beverage cup. Confirm which applies to your order.

A double wall paper cup built for hot coffee and tea service, with 14gsm-20gsm PE coating in single or double side and a 90 mm diameter. Sizes run 4 oz to 24 oz, and printing uses offset or flexo methods with food-grade ink.

Logo customization starts at 5,000 pieces, with pattern, text, and QR code options. SupplyBatch confirms artwork specs, print method on coated paper, and PE coating coverage against the approved sample before production, and provides pre-shipment photos on request.

Why Companies Choose This Product? → Double wall construction with 14gsm-20gsm PE coating, providing insulation for hot drinks.
→ PE coating listed to prevent oil and water seeping through, keeping the cup sturdy and leak-proof.
→ Offset or flexo printing with food-grade ink across pattern, logo, text, and QR code.
→ 5,000-piece MOQ on a 90 mm diameter cup with sizes from 4 oz to 24 oz.
→ Accessories available: cup lid, cup sleeve, cup holder, and straw.
→ Feature line lists waterproof, eco-friendly, durable, food grade, disposable, and recyclable.
→ Application list covers coffee shop, milk tea shop, restaurant, and cinema.
→ SupplyBatch confirms artwork file requirements, print method on coated paper, and PE coating coverage against the approved sample before production, and provides pre-shipment photos on request.

Is This the Right Choice for Your Business? MARKET POSITIONING: A double wall paper cup with 14gsm-20gsm PE coating, positioned in the mid tier of coffee and beverage packaging. It sits above single wall paper cups on insulation (double wall construction) and at a comparable level on material (coated paper with PE coating, standard for hot beverage service). The 4 oz to 24 oz size range and customization across pattern, logo, text, and QR code make it a fit for coffee chains, milk tea shops, restaurants, and cinema concessions.

PRICE BENCHMARK: Not specified by supplier — verify before quoting.

MOQ ADVANTAGE: The 5,000-piece MOQ is standard for a custom-printed cup program at this quality tier. The 15-day lead time, while flagged as needing confirmation, is a reasonable entry-tier window if confirmed.

COMPETITIVE DIFFERENTIATION:
- Double wall construction with 14gsm-20gsm PE coating for insulation and oil/water resistance.
- Offset or flexo printing with food-grade ink across pattern, logo, text, and QR code.
- Sizes from 4 oz to 24 oz, with cup lid, sleeve, holder, and straw listed as accessories.

How Businesses Use This Product? Coffee and Tea Service: Double wall paper cups used at coffee shops for hot lattes, cappuccinos, and tea.
Milk Tea and Fruit Tea Service: Branded cups used at milk tea shops for hot and iced milk tea and fruit tea.
Restaurant Takeout: Branded cups used for takeout hot beverages at restaurants.
Cinema and Event Concessions: Branded cups used at cinema concessions and event beverage service.
Office Coffee Programs: Branded cups used in office coffee and breakroom programs.
Hotel Banquet and In-Room Service: Branded cups used at hotels for banquet and in-room hot beverage service.
Seasonal Beverage Launches: Branded cups used for a holiday or seasonal beverage menu.
Cross-Border Distributor Stock: Bulk cup stock shipped to overseas distributors for resale into local foodservice markets.

Materials, Construction & Specifications

MATERIAL PRIMARY: Coated paper with 14gsm-20gsm PE coating, single or double side.

MATERIAL SECONDARY: PE coating (prevents oil and water from seeping through).

DRINKWARE PERFORMANCE PARAMETERS:
CAPACITY: Sizes listed at 4 oz (≈118 ml), 8 oz (≈237 ml), 12 oz (≈355 ml), 16 oz (≈473 ml), 20 oz (≈591 ml); Paper Cup Size line lists 4oz - 24oz or the size you need.
WALL THICKNESS: Not specified by supplier — verify before quoting.
INSULATION TYPE: Double Wall per the source style line.
TEMPERATURE RETENTION: Not specified by supplier — verify before quoting. Double wall described as providing better insulation.
LEAK-PROOF RATING: Not specified by supplier — verify before quoting. PE coating described as leak-proof per source.
LID MATERIAL: Not specified by supplier — accessories listed as cup lid, cup sleeve, cup holder, straw.

STANDARD DIMENSIONS: Diameter 90.0 mm (3.54 in).

CUSTOMIZABLE DIMENSION RANGE: 4 oz to 24 oz or the size you need; exact customization range not specified by supplier — verify before quoting.

WEIGHT PER UNIT: Not specified by supplier — verify before quoting.

PRINT AREA DIMENSIONS: Not specified by supplier — verify before quoting.

SURFACE TREATMENT OPTIONS: PE coating, single or double side.

COLOR OPTIONS: Custom color per customization options; Pantone matching MOQ not specified by supplier — verify before quoting.

DIMENSIONAL TOLERANCE: Not specified by supplier — verify before quoting.

COMPLIANCE STANDARDS MET: Food Grade listed as a feature. No certificate number or named standard is shown — request current documentation for the order lot.

Manufacturing Details

1. Raw material sourcing and incoming QC: coated paper stock and PE coating resin received against the confirmed order spec, checked for paper weight, coating coverage, and food-grade documentation before forming.
2. Core manufacturing: cup body formed to the specified capacity (4 oz to 24 oz) and 90 mm diameter, PE coating applied (single or double side), double wall bonded, and rim and base finished.
3. Decoration: logo applied by offset or flexo printing with food-grade ink. Print parameters are confirmed on the sample, since each method behaves differently on coated paper.
4. QC checkpoint: inspection of PE coating coverage and seam integrity, lid fit, double wall bonding, rim and base integrity, print registration with food-grade ink, and dimensional consistency against the approved sample and agreed defect criteria.
5. Packaging and final inspection: packed per the confirmed packaging spec, then final inspection before release.

Technical note: supply artwork in vector format (AI, EPS, or PDF), CMYK color mode, minimum 300 DPI for raster elements, with 3 mm bleed. Submit a Pantone reference for brand color matching.

Packaging, Carton & Shipping Details

ORIGIN & FACTORY TYPE: Zhejiang, China — OEM cup manufacturer with verified customization capability (minor, drawing-based, sample-based, full customization).

INNER PACKAGING: Selling units are single item; inner pack quantity not specified by supplier — verify before quoting.

MASTER CARTON: Carton quantity and dimensions not specified by supplier — verify before quoting. Single package size and gross weight not stated in source — request both at quotation.

PALLET SPEC: Pallet configuration not specified by supplier — verify before quoting.

EXPRESS SHIPPING: Carrier and transit days not specified by supplier — verify before quoting.

SEA FREIGHT: FCL/LCL availability and transit days to US/EU not specified by supplier — verify before quoting.

REQUIRED DOCUMENTATION: Commercial invoice, packing list, certificate of origin as standard export documents. No product-specific certificates are named on the source page — documentation available upon request. For a food-contact drinkware item, request the food-grade test reports the supplier holds for the paper stock and PE coating and confirm they cover your destination market's requirements.

HS CODE CATEGORY: HS code and duty rate not specified by supplier — verify before quoting. Confirm classification with a customs broker.

IMPORT COMPLIANCE NOTES: Double wall paper cup with PE coating. Destination-market requirements vary, and food-contact documentation may apply. Documentation for your specific market can be provided upon request.

QUALITY GATE: AQL level and third-party inspection policy not specified by supplier — verify before quoting. Confirm PE coating coverage and seam integrity, lid fit, double wall bonding, rim and base integrity, print registration, and dimensional consistency against the 90 mm diameter and specified capacity at pre-shipment inspection.

How Much Should You Order?

STARTER 5,000-10,000 pcs: Single-location coffee or milk tea shop programs | 5,000-pc MOQ applied
SMALL BATCH 10,000-50,000 pcs: Multi-location coffee and tea shop rollouts | Entry wholesale pricing
MID VOLUME 50,000-200,000 pcs: Regional beverage chains and restaurant groups | Standard wholesale pricing
BULK 200,000-1,000,000 pcs: National beverage chains and distributor stock | Best unit economics, pallet shipping
ENTERPRISE 1,000,000+ pcs: Annual beverage programs and cross-border distributor stock | Custom pricing, negotiated lead time, dedicated account support

Order Quantities & Volume Options

Minimum 5,000 pcs | Sizes 4 oz to 24 oz

Production Schedule & Lead Time

15 days listed for 1-1 pcs | Above 1 to be negotiated — confirm for your quantity

Questions Buyers Often Ask

Q: Coffee and tea service, milk tea and fruit tea, restaurant takeout, cinema concessions

A:

**Q: What is your standard AQL defect tolerance level for bulk shipment acceptance — AQL 1.5, 2.5, or 4.0?**

A: The source page does not list an AQL level, so it must be agreed in the purchase order. For a double wall paper cup, define inspection criteria for PE coating coverage and seam integrity, lid fit, double wall bonding, rim and base integrity, print registration, and dimensional consistency against the 90 mm diameter and the specified capacity. Confirm whether third-party QC sign-off is included or quoted separately.

**Q: Do you provide pre-shipment inspection reports with third-party QC sign-off, and what is the cost?**

A: The source lists samples as available but does not state a sample time or inspection policy. Pre-shipment inspection terms and cost are not stated — request them at quotation. Confirm whether inspection is in-house or third-party and specify the report format in the purchase order.

**Q: What payment terms do you offer — T/T deposit percentage, balance trigger point, and accepted payment methods?**

A: Payment terms are not stated on the source page. The listed commercial terms are a 5,000-piece MOQ, a 90 mm diameter, and sizes from 4 oz to 24 oz. Deposit percentage, balance trigger, and accepted methods should be confirmed in the quotation and purchase agreement.

**Q: What is the realistic production lead time from artwork approval to ready-to-ship, not the marketing headline figure?**

A: The source lead-time table lists 15 days for 1-1 piece and above 1 to be negotiated — that range is too narrow to be a real production schedule, so treat it as a data-entry artifact and request the production window for your actual quantity at quotation. For a 5,000-piece order, lock the figure in writing before deposit rather than relying on the table as printed.

**Q: Can the factory match a specific Pantone color on the coated paper cup?**

A: Color is listed as a customization option, but Pantone matching capability and color-drift tolerances are not specified in the source. Offset and flexo printing on coated paper reproduce color differently than on uncoated stock, so submit a physical color reference with artwork and confirm matching on a pre-production sample before the bulk run.

**Q: How does a double wall paper cup compare with a single wall paper cup or a plastic cup?**

A: The double wall construction provides insulation that a single wall paper cup does not, which matters for hot coffee and tea service where the cup is held directly. A single wall cup is lower in unit cost and lighter to ship, but typically requires a sleeve for hot drinks. A plastic cup is more transparent but not suited to hot beverage service. For a coffee shop program where the cup is the customer-facing container, the double wall format is the fit.

Related Buying Guides

How to Order Custom Porcelain Espresso Cups with Logo for Cafés and Coffee Brands

Read Guide →

Custom A5 Journals in Ten Colors: A Real Wholesale Sourcing Request:A Practical Guide to Materials, Cover Design, and Small-Batch Sourcing

Read Guide →

Custom Symbol Pendant Manufacturing: MOQ, Tooling & Materials

Read Guide →

Wholesale Rubber Dog Fetch Balls: Materials, Sizes & Buying Guide

Read Guide →

Browse Related Collections

Custom BBQ Tool Sets Wholesale | Personalized Grilling Tools & Outdoor Cooking Kits Lifestyle & Outdoor LifestyleAndOutdoor-Custom Outdoor Items lifestyleandoutdoor-Drinkware

Why SupplyBatch

Real Craftsmanship, Small-Batch Ready

We don’t just chase scale; we care about the details. From the initial sample to the final product, every step is handled with care to make sure your design looks just as good in real life as it does on your screen.

At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive.

Quality Checked & Shipped Right

We inspect every piece before it leaves our floor, weeding out the ones that don't make the cut. We also know the ins and outs of shipping smaller batches—getting them to you safely and cost-effectively, so you don’t have to worry about a thing.

You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.

Customization with Brand Services

Customization with a Personal Touch

You’re working with experts who understand the technical side of custom manufacturing inside and out. We don’t just process orders; we act as an extension of your team. Whether it’s fine-tuning your logo dimensions to ensure it looks sharp, recommending the most durable materials for your specific use-case, or troubleshooting production files before they hit the machines—we’re hands-on. We’re here to bridge the gap between your initial sketches and the professional-grade merchandise you’ll be proud to put your name on.
At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive. You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.