Custom Nylon Beach Tote with Logo | Lined Bulk 500 Pcs

B2B Sourcing Overview: Nylon Lined Beach Tote

• MOQ: 500 pcs (material, size, color, hand-painted)
• Lead Time: 15 days for 1–500 pcs | 25 days for 501–5,000 pcs | 30 days for 5,001–10,000 pcs
• Material: Nylon with polyester lining
• Key Spec: 40 × 21 × 12 cm single package | Water-resistant, waterproof (source-stated)
• Decoration: Letter decoration | Hand-painted available
• Compliance: Documentation available upon request

Attribute Data Matrix

Technical Comparison Analysis

Lined nylon vs. plain mesh beach bag. A plain mesh beach bag drains sand and water well and is generally lower-cost because it uses a single open-weave layer with no lining. This bag uses nylon with a polyester lining and lists water-resistant and waterproof features, so it keeps contents drier than a plain mesh bag would. For a family beach or camping bag that carries towels and dry gear alongside wet items, the lined construction is the fit. For a sand-drain bag that only needs to hold wet gear, the plain mesh format is the practical alternative at lower cost.

Nylon lined tote vs. insulated cooler tote. An insulated cooler tote adds a thermal layer and typically a leak-resistant inner lining, and it is built to hold cold items for a set window — it is generally higher-cost because of the added insulation construction. This bag lists water-resistant and waterproof features but the source does not specify a thermal insulation layer or temperature-retention window. For carrying dry gear and keeping it protected from splashes, the lined nylon tote is the fit; for food-and-drink cold storage, confirm the insulation spec with the supplier or compare against a dedicated cooler tote. Documentation can be provided for your destination market's requirements on request.

Multi-Scenario Buyer Applications

Beach and resort retailer buyer. A retailer stocking a branded family beach tote would confirm three things before ordering: the actual material and closure spec (the source listing has a conflicting jute-bag block, so the retailer should lock the SKU in writing), the water-resistant and waterproof finish under a simple splash test on a sample, and the 500-piece customization minimum against the assortment size. The single package measures 40 × 21 × 12 cm, and the listed 18 kg gross weight needs clarification before freight planning — that figure likely describes a carton. The lead time is 15 days for 1–500 pieces and 25 days for 501–5,000, so a 500-piece branded run falls in the 25-day tier.

Outdoor and camping gear buyer. A camping gear buyer evaluating a lined tote would confirm the bag handles wet and dry contents in the same trip, that the handle attachment holds a family-scale load, and that the customization tier fits the program scale. Hand-painted customization at a 500-piece minimum supports a brand program with a distinctive look, but it adds a manual step and the 25-day production window should be planned from artwork approval. For a camping or beach program where the tote is a functional item rather than a decorative one, standard letter decoration is the leaner path, and the sample confirms the finish on actual nylon.

Promotional products reseller. A reseller quoting branded lined beach totes for a resort or retail client would confirm the SKU in writing before quoting, since the source listing contains two conflicting product blocks. The 500-piece customization minimum suits a mid-size client program, and the 25-day production tier for 501–5,000 pieces fits a seasonal launch. For a cross-border program, verify destination-market textile labeling requirements and HS code with the supplier and customs broker before booking.

FAQ Matrix

Q: Can I order a sample before the 500-piece branded run?
A: Yes — custom sample time is 7 days and custom design service is 3 days. The sample lets you verify the nylon and lining construction, the water-resistant finish under a splash test, and the handle attachment before committing to a 500-piece branded order. Approve the sample with the logo or hand-painted decoration applied to confirm color and finish on the actual nylon.

Q: How should I plan freight around the tiered lead times?
A: Lead time is 15 days for 1–500 pieces, 25 days for 501–5,000, and 30 days for 5,001–10,000; each starts after artwork approval and deposit. Book freight against the confirmed production completion date. The source lists an 18 kg single gross weight, which likely describes a carton — confirm the per-unit weight and master carton configuration in writing before booking. Sea freight suits bulk volumes; express covers samples and short-notice needs.

Q: What payment structure should I expect?
A: Payment terms are not published in the listing. T/T with a deposit and balance before shipment is standard for this order type; confirm the split, accepted methods, and balance trigger in the quotation. Tie the terms to the production schedule so the 25-day tier, the 7-day sample step, and the payment milestones line up for the first branded order.

Q: How do I verify the material, finish, and decoration before the run?
A: Request the exact SKU spec sheet in writing to confirm material, model, and closure type, since the source listing contains a conflicting jute-bag block. Then approve a sample and check the nylon and lining, the water-resistant finish under a splash test, and the decoration quality. Specify an AQL level in the purchase order (AQL 2.5 is common for bags) and request a pre-shipment inspection report.