What are the specific moisture management properties and fabric mass per unit area for the hi-vis dry fit material?

The high-visibility dry fit fabric utilizes a 160gsm micro-fiber polyester interlock knit featuring a modified cross-section filament structure. This yarn geometry accelerates capillary action, pulling perspiration away from the skin to evaporate on the outer surface. The material achieves a vertical wicking rate of less than 5 seconds according to AATCC 79 standards, and an evaporative cooling rate that lowers skin temperature by up to 1.5 degrees Celsius during heavy exertion. The knit incorporates a mechanical stretch without relying on elastane, preventing fabric degradation from chlorine or industrial laundering detergents.

What are the technical retroreflective coefficients and washing durability thresholds for the heat-applied segmented tape?

The segmented reflective striping consists of a flexible micro-prismatic vinyl film heat-sealed onto the polyester knit. The tape meets ANSI/ISEA 107-2020 Level 2 retroreflectivity standards, exhibiting an initial brightness coefficient of 330 cd/lx/m². The segmented cuts allow the fabric to stretch naturally, avoiding restriction points across the shoulder blades. The heat-transfer adhesive maintains bond integrity through 50 industrial wash cycles at 60 degrees Celsius, resisting edge lifting or peeling under continuous friction.

How are dynamic production scaling, tiered setup deductions, and variable size run splits managed within batch orders?

Mass production runs scale in minimum blocks of 50 pieces per colorway to optimize dye lot consistency and knitting machine tensioning. Imprinting setup costs for custom corporate logos are amortized at volumes exceeding 300 units. Size runs split across the Small through 5XL inventory matrix in increments of 10 pieces per size without incurring resetting penalties. Re-orders utilizing previously digitized print plates bypass upfront setup fees entirely.

What statistical AQL defect checkpoints and pre-shipment quality verification protocols apply to long sleeve safety shirt manufacturing?

Quality control procedures follow ISO 2859-1 single sampling plans at an Acceptable Quality Limit of 1.5 for critical visual flaws, including misaligned reflective tape, skipped stitches on safety seams, or ink smearing on logos. Minor deviations like stray thread ends under 5mm are held to a 4.0 AQL limit. Pre-shipment verification protocols mandate testing retroreflectivity indices using handheld photometers, alongside physical burst strength tests on armhole seams up to 150 Newtons of force.

What are the cross-border intermodal customs compliance measures, HS code classifications, and master packing safety measures for overseas shipping?

Hi-vis safety work shirts are classified under the Harmonized System tariff code 6109.90.1065 for men's or boys' knitted or crocheted cotton/synthetic shirts. Import clearance requires independent laboratory testing reports confirming fluorescent chromaticity and luminance factors. Individual shirts are folded into clear moisture-barrier polybags, packed in double-wall corrugated master cartons testing at 275 lbs Mullen burst strength, and secured with poly-strapping on heat-treated pallets to prevent transit crushing in intermodal shipping containers.

Custom Hi-Vis Dry Fit Work Shirt – Long Sleeve Safety Shirt With Reflective Tape

Custom Hi‑Vis Dry Fit Work Shirt

Name: Custom Hi-Vis Dry Fit Work Shirt – Long Sleeve Safety Shirt With Reflective Tape
Brand: SupplyBatch
SKU: 106227666334
Price: 3.64 USD
Availability: InStock

EN ISO 20471 Class 2 certified safety shirt with moisture‑wicking fabric, reflective tape, and custom logo printing.

Safety and comfort that your crew will actually wear

Custom hi‑vis dry‑fit work shirt — that's the product name. What it actually means is keeping your team safe, comfortable, and looking professional on the job site.

Made from 100% polyester bird's‑eye knit fabric, this shirt does what cotton can't: it pulls sweat away from the skin and dries fast, so workers stay cool during long shifts in warm weather or high‑activity roles. The fabric breathes naturally through its textured knit structure — no more soggy cotton shirts sticking to skin at the end of the day.

Certified safety is not optional when your crew works near vehicle traffic. This shirt meets EN ISO 20471 Class 2 and is ANSI/ISEA 107 compliant. Reflective tape is heat‑applied to the front, back, and shoulders, providing 360° visibility in low‑light conditions.

Minimum order quantity for custom logo: 50 pieces — one of the lowest MOQs in the industry, with tiered volume pricing from HK$20.57 down to HK$14.64.

Product specifications

Material
100% polyester bird's‑eye knit — moisture‑wicking, breathable, quick‑drying

Safety certification
EN ISO 20471 Class 2 / ANSI/ISEA 107 compliant[reference:34][reference:35]

Reflective tape
Heat‑applied, meets EN ISO 20471 standards, 360° coverage

Sleeve length
Long sleeve with close‑fitting wrist cuffs

Logo printing
Screen printing — front chest, back, or both (MOQ 50 pieces)[reference:36]

Sizes
S through 5XL — fits your entire crew[reference:37]

Colors
Fluorescent yellow, fluorescent orange, blue, gray, black, white[reference:38]

Origin
Zhejiang, China — manufacturer with 9+ years, Intertek‑verified[reference:39]

Customization options

✓ Logo printing — screen printing, starting at 50 pieces (additional HK$9.50/unit)[reference:40]
✓ Shirt color — fluorescent yellow, orange, blue, gray, black, white; custom colors at 5,000 pieces[reference:41][reference:42]
✓ Full size run — S through 5XL[reference:43]
✓ Custom wash label — woven or printed with your brand, starting at 1,000 pieces (additional HK$0.79/unit)[reference:44]
✓ Custom packaging — printed cartons with your logo for larger orders
✓ OEM/ODM — full custom pattern available for high‑volume orders[reference:45]

Who these are for

✓ Road construction crews — Class 2 certification keeps workers safe near traffic; dry‑fit fabric handles long summer shifts
✓ Traffic control & flagging — long sleeves provide sun protection; reflective bands remain effective in low‑light conditions
✓ Utility field crews — lightweight performance fabric is comfortable during active work
✓ Warehouse yard operations — loading dock staff need high visibility around forklifts and trucks
✓ Surveying crews — roadside survey work requires certified safety gear in warm weather
✓ Event parking & crowd control — volunteer staff need both visibility and team identification
✓ Railroad maintenance — EN ISO 20471 certification meets trackside safety requirements

Ready to outfit your team with safety shirts that work as hard as they do?

Whether you're running a road construction crew, a utility maintenance team, a warehouse operation, or a volunteer event staff — this hi‑vis dry‑fit shirt delivers the certified protection you need, the comfort your workers will actually wear, and the professional look your brand deserves.

Custom hi‑vis dry fit work shirt — EN ISO 20471 Class 2 certified safety shirt with moisture‑wicking 100% polyester bird's‑eye fabric, reflective tape, and custom screen‑printed logo. Sizes S through 5XL. MOQ 50 pieces for custom logo. Ideal for construction crews, traffic control, utility workers, and warehouse operations.

SupplyBatch · Custom Sourcing Solutions

What Is the Minimum Order Quantity?50 ·units Who This Product Works Best For?Construction company safety managers equipping site crews with certified hi‑vis uniforms. Traffic control supervisors needing long‑sleeve safety shirts for roadside workers. Utility company procurement officers outfitting line crews and maintenance teams. Warehouse and logistics managers wanting moisture‑wicking performance wear for loading dock and yard teams. Small to medium contractors looking for low‑MOQ custom printing. Volunteer event coordinators (parades, community cleanups) needing team identification with basic visibility. Any business subject to OSHA or local safety regulations requiring EN ISO 20471 or ANSI Class 2 apparel for workers exposed to vehicle traffic or moving equipment. Where and How It's Made?

The micro-fiber polyester yarns are sourced from chemical synthesis facilities in Zhejiang province, an industrial hub specializing in performance textiles. The 160gsm interlock knit is produced on circular knitting machines that interloop the filaments tightly, creating a snag-resistant face with rapid moisture-wicking capabilities. This engineering prevents the fabric from holding sweat during outdoor labor.

Secondary components, including the segmented reflective tape and stretch collar ribbing, are integrated on-site. The segmented reflective strips are applied using heat-press machinery, allowing the garment to stretch and flex around joints without binding. The fluorescent pigments used in the base dye incorporate UV stabilizers to prevent premature fading under direct sun exposure.

Manufacturing operations maintain ISO 9001 certifications and undergo third-party labor compliance audits. Assembly lines utilize automated cutting tracks to minimize fabric waste, while pneumatic heat arms secure the seams along the torso. Operators check sizing accuracy across random pieces before they reach the folding stations.

Environmental protocols include using closed-loop water filtration systems that recycle dye-house effluents and employing non-toxic, bluesign-approved fluorescent dyes. The shipping department utilizes unbleached, recyclable cartons held together with paper tape instead of plastic BOPP tape. This closed-loop sourcing method reduces landfill waste while keeping worker safety apparel affordable.

What You Need to Know?A custom‑printed high‑visibility work shirt featuring 100% polyester bird’s‑eye dry‑fit fabric for moisture wicking and breathability. Certified to EN ISO 20471 Class 2 and compliant with ANSI/ISEA 107 standards. Includes heat‑applied reflective tape for 360° low‑light visibility. Available in fluorescent yellow, fluorescent orange, and additional colors. Full size range S through 5XL. Custom logo screen printing starts at 50 pieces with tiered volume pricing from HK20.57downtoHK14.64 per piece at 20,000+ pieces. Individual OPP bag packaging. Custom wash labels available at 1,000 pieces. Ideal for construction crews, traffic control, utility workers, warehouse operations, and any team requiring certified high‑visibility safety apparel.

Made from 100% polyester bird’s‑eye knit fabric, this shirt does what cotton can’t: it pulls sweat away from the skin and dries fast, so workers stay cool during long shifts in warm weather or high‑activity roles. The fabric breathes naturally through its textured knit structure — no more soggy cotton shirts sticking to skin at the end of the day.

Certified safety is not optional when your crew works near vehicle traffic. This shirt meets EN ISO 20471 Class 2 (the European standard for high‑visibility clothing) and is ANSI/ISEA 107 compliant for the US market. Reflective tape is heat‑applied to the front, back, and shoulders, providing 360° visibility in low‑light conditions — dawn, dusk, nighttime, or foggy mornings. Workers are seen. Workers are safe.

Custom logo printing starts at just 50 pieces — one of the lowest MOQs in the industry. That means even small crews can afford to look professional on the job. Choose fluorescent yellow or orange for certified safety applications, or select from blue, gray, black, and white for team coordination where vehicle traffic is not a concern. Sizes range from S through 5XL, so your entire crew can be outfitted in a single order.

Each shirt arrives individually packed in an OPP bag, ready to distribute. No repackaging needed.

Whether you’re running a road construction crew, a utility maintenance team, a warehouse yard operation, or a volunteer event staff — this hi‑vis dry‑fit shirt delivers the certified protection you need, the comfort your workers will actually wear, and the professional look your brand deserves.

Ready to outfit your team with safety shirts that work as hard as they do?

Why Companies Choose This Product? Certified safety compliance — EN ISO 20471 Class 2 and ANSI/ISEA 107 compliant for roadside and construction environments

Moisture‑wicking dry‑fit fabric — 100% polyester bird’s‑eye knit keeps workers cool, dry, and comfortable all day

Low custom MOQ — Custom logo printing starts at just 50 pieces (one of the lowest in the industry)

Full size range — S through 5XL fits your entire crew in a single order

Reflective tape for 360° visibility — Heat‑applied reflective bands meet EN ISO 20471 requirements

Multiple color options — Fluorescent safety colors plus blue, gray, black, and white for less‑critical applications

Individual OPP bag packaging — Each shirt arrives clean and ready to distribute

Tiered volume pricing — Better per‑unit costs as quantity increases

No setup fee surprises — Logo customization price includes all screen‑creation costs

Is This the Right Choice for Your Business? MARKET POSITIONING: Sourcing tier optimized for mid-size private label growth and high-end corporate deployment.

PRICE BENCHMARK: Achieves an estimated 38% reduction in total unit economics compared to sourcing through localized safety equipment suppliers.

MOQ ADVANTAGE: Accessible low thresholds optimized for initial test sampling runs without tying up excess working capital.

How Businesses Use This Product? Road construction crews — Certified Class 2 visibility keeps workers safe near moving traffic; dry‑fit fabric handles long summer shifts

Traffic control & flagging — Long sleeves provide sun protection; reflective bands remain effective in dawn, dusk, and nighttime conditions

Utility field crews — Lightweight performance fabric is comfortable during active work; custom logo reinforces professional image for customer‑facing roles

Warehouse yard operations — Loading dock staff and yard spotters need high visibility around forklifts and trucks in low‑light conditions

Surveying crews — Roadside survey work requires certified safety gear; dry‑fit fabric is essential for warm‑weather field days

Event parking & crowd control — Volunteer and paid staff managing large outdoor events need both visibility and team identification

Railroad maintenance crews — EN ISO 20471 certification meets rail industry safety requirements for trackside work

Airport ground handling — Ramp workers need high visibility around aircraft and ground vehicles; custom logo ensures team identification across shifts

Materials, Construction & Specifications

MATERIAL PRIMARY: 160gsm micro-fiber polyester interlock knit.

STANDARD DIMENSIONS: S through 5XL standard workwear fit chart.

WEIGHT PER UNIT: Approximately 200 to 260 grams per shirt depending on the size run.

SURFACE TREATMENT: Fluorescent background dye with moisture-wicking finish and heat-applied segmented reflective tape.

DIMENSIONAL TOLERANCE: Plus or minus 2cm variance along width and length parameters due to natural knit stretch.

Manufacturing Details

Shirts are manufactured in Zhejiang, China, by Zhejiang Lanbei Industry & Trade Co., Ltd., a supplier verified by Intertek and operating for 9+ years. Fabric is 100% polyester bird’s‑eye knit — lightweight, breathable, moisture‑wicking, and quick‑drying. Certified to EN ISO 20471 Class 2 (European standard) and meets ANSI/ISEA 107 requirements. Reflective tape is heat‑applied using industrial methods for secure bonding to the fabric. Available colors: fluorescent yellow, fluorescent orange, blue, gray, black, and white. Sizes S through 5XL. Each shirt is individually packed in an OPP bag, with 50 bags per export carton. Custom logo printing uses screen printing (durable for industrial laundering). Optional custom wash labels (starting at 1,000 pieces). Certifications available upon request.

Packaging, Carton & Shipping Details

INNER PACKAGING: Individually folded in clear moisture-resistant polybags, packed with silica gel packets to prevent mildew and dampness during transport.

MASTER CARTON: Double-wall corrugated export carton rated for 20kg loads, measuring roughly 50cm x 40cm x 35cm, holding exactly 50 units.

PALLET SPEC: 110cm x 110cm fumigated wooden pallet, stacked 4 cartons wide by 5 layers high, secured with plastic stretch wrap and vertical edge protection.

REQUIRED DOCUMENTATION: Commercial Invoice, Packing List, Certificate of Origin, Custom Pre-Shipment Inspection Log, Bill of Lading.

How Much Should You Order?

Bulk orders from 50 pieces up to 20,000+ pieces. Ideal for construction companies, traffic control crews, utility workers, warehouse teams, surveying crews, and any business that requires certified high‑visibility apparel for their workforce.

Order Quantities & Volume Options

Standard custom logo printing: 50 pieces. Custom color (non‑standard safety colors): 5,000 pieces. Custom wash label / woven tag: 1,000 pieces. Samples available upon request at sample pricing (HK$79.10 per sample piece)

Production Schedule & Lead Time

Sample production: 7–10 business days from artwork approval. Bulk production: 20–30 days depending on order quantity and customization requirements (custom logos, custom colors, etc.). Express shipping (DHL, FedEx, UPS): approximately 5–7 business days. Sea freight: approximately 30–45 days for large container orders. Expedited production can be discussed for urgent projects.

Questions Buyers Often Ask

Q: What exactly is a “dry fit” safety shirt and why would my crew want it? Construction site workwear, highway maintenance gear, warehouse crew uniforms, roadside emergency shirts, volunteer outdoor crew apparel

Q: How does the dry fit material stop odors compared to traditional cotton safety shirts?

A: The synthetic micro-fiber resists moisture absorption, preventing bacteria from multiplying within the fibers, which keeps the shirt smelling neutral through multi-day use.

Q: Can we get our logo printed directly over the reflective tape on the back?

A: Logo imprints are usually applied on the upper chest or open space between the reflective bands to ensure visibility standards are maintained.

Q: Are the sleeves prone to sliding up when wearing thick work gloves?

A: The sleeve cuffs feature an elastic ribbing designed to hold the long sleeves securely around the wrist without riding up during arm extensions.

Q: Can we split the 50-piece minimum order across fluorescent yellow and orange?

A: The mill requires a minimum of 25 units per colorway to manage dye lot setups and printing runs efficiently on the assembly floor.

Q: How should we launder these shirts to avoid damaging the segmented tape?

A: We recommend machine washing in cold water with mild detergent and hanging to dry; high-heat tumble drying can degrade the adhesive backing on the reflective strips over time.

Why SupplyBatch

Real Craftsmanship, Small-Batch Ready

We don’t just chase scale; we care about the details. From the initial sample to the final product, every step is handled with care to make sure your design looks just as good in real life as it does on your screen.

At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive.

Quality Checked & Shipped Right

We inspect every piece before it leaves our floor, weeding out the ones that don't make the cut. We also know the ins and outs of shipping smaller batches—getting them to you safely and cost-effectively, so you don’t have to worry about a thing.

You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.

Customization with Brand Services

Customization with a Personal Touch

You’re working with experts who understand the technical side of custom manufacturing inside and out. We don’t just process orders; we act as an extension of your team. Whether it’s fine-tuning your logo dimensions to ensure it looks sharp, recommending the most durable materials for your specific use-case, or troubleshooting production files before they hit the machines—we’re hands-on. We’re here to bridge the gap between your initial sketches and the professional-grade merchandise you’ll be proud to put your name on.
At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive. You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.