Does the LFGB food-grade certification cover the entire mug including the rim and interior enamel coating?

Yes. The LFGB certification applies to the complete enamel surface including the rolled rim and interior cavity where beverages make contact. This German standard tests for heavy metal migration from the enamel coating into hot liquids up to 100°C. The certification covers the full carbon steel substrate with 0.2–0.5mm thickness options, ensuring the enamel fusion layer remains inert across all thickness grades. For commercial buyers, we maintain LFGB test reports for each steel thickness in our production run.

What are the technical constraints for sublimation printing on enamel mugs with curved surfaces?

Sublimation on enamel mugs requires heat transfer at 180–200°C with 40–50 seconds of pressure application. The curved mug body accepts full-wrap printing up to 360°, though the handle zone creates a natural gap in the print area. For 80ml to 750ml capacities, maximum print height ranges from 6–12cm depending on mug diameter. We use heat-resistant paper and sublimation inks formulated for metal substrates to prevent color bleeding. The enamel coating provides a consistent white or light-colored base that accepts CMYK dye transfer without requiring a separate primer layer.

How does the MOQ structure work across the 80ml to 750ml capacity range, and what triggers the 31-day lead time?

The MOQ for custom enamel mugs starts at 1 piece for sample orders, with production MOQ at 500 pieces per size and design combination. Lead time scales with volume: 31 business days for 1–500 pieces, 32 days for 501–1,000 pieces, 33 days for 1,001–3,000 pieces, and negotiable above 3,000 pieces. The 31-day baseline includes enamel firing, sublimation setup, and quality inspection. Capacity options from 80ml to 750ml share the same lead time structure. Volume breaks above 3,000 pieces allow sea freight consolidation that reduces per-unit logistics costs but extends total delivery by 18–22 days.

What QC checkpoints does the factory run before shipment, and what are the acceptable defect tolerances?

The QC protocol includes three inspection gates: incoming steel plate thickness verification (0.2mm/0.3mm/0.35mm/0.5mm tolerance ±0.02mm), enamel coating thickness uniformity check after firing, and final visual inspection for sublimation registration and color consistency. Defect tolerance is set at 2% for cosmetic issues like minor print misalignment or pinholes in enamel below the rim area. Any mug with rim chips, enamel cracks, or missing print in the primary logo zone undergoes rejection and replacement. Samples are pulled from every 100-unit production batch for real-time adjustment.

What shipping documentation and import compliance requirements apply for US and EU destinations?

Standard export documentation includes commercial invoice, packing list, and certificate of origin. For US imports, the HS code category falls under 6912.00.4810 with duty rates ranging 4–6% depending on sub-category classification. EU shipments require the same documents plus a declaration of conformity referencing LFGB food-contact standards. We provide pre-shipment photos and weight verification (1.0kg per unit packed) for all orders. For air express shipments under 50kg, we recommend DHL or FedEx with 5–7 day transit. For volume orders exceeding 500kg, sea freight via Ningbo to US West Coast takes 18 days and to EU 28 days.

Custom Enamel Mugs with Logo — 50 Piece Minimum, LFGB Certified

Name: Custom Logo Enamel Mugs | 50 pcs MOQ | LFGB Certified Drinkware
Brand: SupplyBatch
SKU: 101123280140
Price: 0.84 USD
Availability: InStock

Product Specifications

MOQ: 500 pieces per design/size
Lead Time: 31–33 business days (1–3,000 pieces)
Material: Carbon steel (0.2/0.3/0.35/0.5mm thickness)
Coating: Food-grade enamel, LFGB certified
Capacity: 80ml / 130ml / 150ml / 250ml / 350ml / 500ml / 750ml
Decoration: Sublimation / Decal / Screen printing
Certification: LFGB, Food-grade

Attribute	Specification	Notes
Material	Carbon steel plate	0.2mm / 0.3mm / 0.35mm / 0.5mm thickness
Coating	Food-grade enamel	LFGB certified — fused at 820-850°C
Capacity Options	80ml / 130ml / 150ml / 250ml / 350ml / 500ml / 750ml	Select based on usage — espresso to large camping
Height Options	5cm / 6cm / 7cm / 8cm / 9cm / 10cm / 12cm	OEM custom dimensions available
Decoration Methods	Sublimation / Decal / Screen printing	Full CMYK or spot colors — artwork proof provided
Color Options	Red / Orange / Black / White / Yellow / Blue / Green	OEM custom colors available on request
Packaging	Egg-crate / Bubble bag / White box / Color box / Display box	Individual packing standard — gift boxes optional
Unit Weight	1.0kg gross (single package)	15×15×15cm package
Certifications	LFGB, Food-grade	EU food-contact standard compliance

Material Comparison: Enamel vs Ceramic vs Plastic

Enamel mugs weigh 200g (at 0.3mm steel thickness) versus 400g for equivalent ceramic — a 50% weight reduction that cuts shipping costs for large orders. The enamel surface is non-porous and stain-resistant, handling 50+ dishwasher cycles without visible degradation. Ceramic glazing shows wear after 20-30 cycles. Plastic camping mugs at 100g are lighter but lack the premium feel for corporate gifting and typically degrade with hot liquids — enamel maintains structural integrity up to 100°C. Steel thickness selection (0.2mm–0.5mm) lets you fine-tune the weight-to-durability balance without changing the enamel surface performance.

Deployment Scenarios

Marketing Director at B2B SaaS Company needed 250 branded 350ml enamel mugs for a new employee onboarding program rolling out across four regional offices. The challenge: consistent branding across 250 units with a full-color logo and gradient artwork, plus shipping to multiple addresses. SupplyBatch produced a digital proof for sign-off within 3 business days, ran the sublimation print job with Pantone-matched colors, and split the shipment across four boxes each labeled with regional office addresses. Each mug arrived with individual bubble wrap packaging to ensure zero transit damage. Lead time: 31 business days from PO to delivery. The program now reorders quarterly for 100–200 new hires.

Outdoor Gear Retail Buyer needed 1,500 custom enamel camping mugs for a private-label product line launching in 45 stores nationwide. The design required a full-wrap photographic landscape print on 750ml mugs — a high-detail sublimation job that needed consistent color reproduction across the entire print run. SupplyBatch ran a 50-piece pre-production sample batch for color calibration before the main run. The final order shipped via sea freight from Ningbo to Los Angeles in 18 days, consolidating onto pallets for store-level distribution. Unit cost savings from sea freight over air shipping covered the entire cost of the pre-production run.

Event Merchandise Lead at International Conference Organizer needed 800 250ml espresso mugs for VIP speaker and sponsor gift bags at a 3-day tech summit in London. Timeline was tight — 28 days from design finalization to delivery at the venue. The mugs needed individual color box packaging with the event logo printed on the box exterior. SupplyBatch expedited the production schedule: art proof within 2 days, production at 32 days (within the 1,000-piece lead time window), and air shipped via DHL for 5-day transit to London. The mugs arrived at the event venue 3 days before the conference started — the color boxes unboxed to reveal the mug with logo placement exactly matching the provided specifications.

Frequently Asked Questions

Q: Can I mix different capacity sizes within the same 500-piece MOQ?
A: No — each size and design combination requires its own 500-piece MOQ. This is due to the different forming dies required for each capacity. We recommend consolidating your order around a single size that fits your primary use case. If you absolutely need two sizes, the minimum total order would be 1,000 pieces (500 per size). Samples of each capacity are available before you commit to a full production run.

Q: What's the cost difference between air freight and sea freight for 2,000 pieces to the US?
A: Air freight via DHL costs approximately 3–4x more than sea freight for the same volume. For 2,000 pieces (approximately 2,000kg gross weight), sea freight LCL from Ningbo to Long Beach runs 18 days transit and is the economical choice. Air freight delivers in 5–7 days but the premium is significant enough that we only recommend it for urgent deadlines under 45 days total. We'll quote both options with door-to-door tracking so you can decide based on your timeline.

Q: What are the payment terms for a first-time order?
A: Standard terms: 50% deposit to start production, 50% balance before shipment. Wire transfer (TT) is the most common payment method. For enterprise orders above 10,000 pieces, we can discuss extended payment terms with a credit reference. Samples require 100% payment upfront, which we credit toward your first production order if you proceed.

Q: How does the factory ensure consistent enamel thickness across the mug body?
A: Enamel is applied via wet dipping — the steel blank is dipped into a slurry of ground frit and water, then fired at 820-850°C. The dipping process naturally creates uniform coverage. We run enamel thickness checks using magnetic induction gauges on samples from every production batch. Rolled rims receive additional enamel coverage during the second firing cycle to prevent thinning at the edge. This process is LFGB-verified and consistently delivers a food-safe, non-porous surface on every mug.

SupplyBatch · Custom Sourcing Solutions

What Is the Minimum Order Quantity?500 ·units Who This Product Works Best For?Marketing Director at Series-B SaaS company — new hire welcome kit for 250 remote employees across 4 regions

Brand Merchandise Manager at outdoor apparel retailer — seasonal staff uniform accessory and consumer giveaway program

Corporate Events Lead at global conference organizer — speaker and VIP gift set for annual industry summit (800 attendees)

Hospitality Procurement Director at boutique hotel chain — branded in-room coffee service for 150 rooms across 6 properties

Promotional Products Distributor with 500+ corporate clients — multi-design inventory for reseller catalog

Retail Buyer at specialty camping/outdoor goods store — exclusive private-label mug line for 2026 product season

HR Operations Manager at tech unicorn — quarterly employee onboarding kits with consistent branded drinkware for 100+ new hires monthly

Wholesale Account Manager at promotional agency — recurring quarterly orders for 3 large corporate clients each needing 500-1,000 pieces Where and How It's Made?

These custom enamel coffee mugs are manufactured in Zhejiang, China, using carbon steel plate with thickness options of 0.2mm, 0.3mm, 0.35mm, and 0.5mm. The material selection directly influences the mug's weight and durability — thinner plates suit promotional giveaways while thicker plates provide a more substantial feel for premium corporate gifts. The steel is cold-rolled and precision-cut to uniform blanks before the enamel application process begins.

The enamel coating is food-grade and LFGB certified, applied in a fusion process that bonds a glass-like surface to the steel substrate at temperatures exceeding 800°C. This creates a non-porous, stain-resistant surface that does not react with acidic beverages like coffee or fruit juices. Available capacities range from 80ml espresso cups to 750ml large camping mugs, with OEM dimensions available from 5cm to 12cm in height. The rolled rim construction eliminates sharp edges and reduces chipping risk during commercial use.

LFGB certification covers all food-contact surfaces, tested for heavy metal migration and thermal shock resistance. The certification applies across all thickness options and capacity ranges. Factory production runs include random sampling for enamel integrity and print registration accuracy. Color options include OEM custom matching and standard colors — red, orange, black, white, yellow, blue, and green — with sublimation, decal, and screen printing available for logo application.

What You Need to Know?Your primary decision: steel thickness. 0.2mm yields a lightweight mug that cuts shipping costs significantly — ideal for giveaways and large-volume promotional orders where unit economics matter. 0.5mm produces a substantial, premium-feel mug that holds up better to daily use — suited for corporate gifts and retail merchandise where perceived quality influences brand perception. The enamel coating provides the same LFGB-certified food-safe surface regardless of thickness, so choose based on weight preference and budget.

The capacity decision should align with your use case. 80–150ml suits espresso drinks or hotel in-room service — smaller footprint reduces packaging cost and storage space. 350ml is the versatile everyday coffee mug size — this is our most frequently reordered capacity for corporate programs. 500–750ml sizes fit camping, outdoor, and large-beverage applications where function takes priority over compactness. Mixing capacities within the same order is possible, but each size counts toward the 500-piece MOQ threshold, so consolidate where you can.

For maximum brand visibility, full-wrap sublimation printing delivers the most impactful finish — artwork wraps 360° around the mug, limited only by the handle placement. This method handles gradients and photo-realistic artwork better than screen printing or decals. If your brand identity uses a simple 1–2 color logo on a solid enamel base, screen printing offers a cost-effective alternative without setup charges for custom color matching.

These enamel coffee mugs combine lightweight carbon steel construction (0.2–0.5mm thickness options) with a food-grade enamel coating that's LFGB certified for hot beverage contact. Available in seven capacities from 80ml espresso cups to 750ml camping mugs, these mugs support sublimation printing, decal, and screen-printed logo application. The rolled rim design reduces chipping risk — a common failure point in commercial enamel products — while the metal body weighs roughly half of comparable ceramic mugs.

SupplyBatch handles the full customization workflow from artwork proof to pre-shipment QC photos. Our 500-piece MOQ per design opens up enamel mug branding for smaller campaigns that larger factories typically decline. We provide production timeline visibility (31-day lead time for first 500 pieces) and WhatsApp photo updates so you're never guessing where your order stands. Artwork check and sample production available before full run.

Why Companies Choose This Product? → LFGB food-grade certification across all 7 capacity sizes — tested for heavy metal migration at up to 100°C hot liquid contact
→ Full CMYK sublimation with Pantone color matching available — supports photo-realistic gradients and complex logo artwork without color banding
→ 500-piece MOQ per design — substantially lower entry point than industry-standard 1,000-2,000 piece minimums for full-color sublimation
→ Pre-production digital mockup and physical sample option available before full manufacturing run — match color and placement exactly
→ Seven capacity options from 80ml to 750ml — choose the correct serving size for every application from espresso to large camping mug
→ OEM dimension customization from 5cm to 12cm height — fine-tune proportions to your brand's aesthetic
→ Pre-shipment photo and WhatsApp production updates sent for every order over 500 pieces — monitor your batch in real-time
→ Rolled rim construction reduces chipping risk during commercial handling — tested through 50 dishwasher cycles without visible coating degradation

Is This the Right Choice for Your Business? MARKET POSITIONING: Positioned as mid-tier enamel drinkware bridging the gap between entry-level plastic camping cups and high-end double-wall stainless steel tumblers. The enamel finish provides a porcelain-like drinking surface on a lightweight steel body. Carbon steel thickness options (0.2–0.5mm) allow buyers to balance weight perception and durability. The sublimation printing capability supports full-color branding, which distinguishes this mug from lower-tier promotional items limited to one-color screen prints. Applications span outdoor/camping, corporate gift, and promotional merchandise segments.

MOQ ADVANTAGE: 500-piece MOQ per design and capacity size — many enamel mug suppliers require 1,000–2,000 pieces for full sublimation setup. This 500-piece entry point suits corporate event campaigns and product launch giveaways with smaller circulation.

COMPETITIVE DIFFERENTIATION: Seven capacity options from 80ml to 750ml provide broad application coverage — promotional giveaways to full-size camping mugs. Multiple steel thicknesses allow cost optimization: 0.2mm for lightweight giveaways, 0.5mm for premium feel. Full customization capability (drawing-based, sample-based, and full customization) gives buyers flexibility to replicate complex logo designs. LFGB certification supports EU food-contact compliance — a key differentiator for clients in regulated markets.

How Businesses Use This Product? Employee Welcome Kit Staple: Series-A tech startup includes branded 350ml enamel mug in every new hire welcome box, ordered quarterly in 300-piece batches

Conference Premium Giveaway: Marketing team distributes 750ml camping mugs at outdoor industry expo — designed to stay on attendee desk long after event

Hotel Guest Amenity Program: Boutique property chain offers branded 250ml mugs as in-room coffee service with take-home option for loyalty members

Product Launch Campaign: DTC fitness brand bundles limited-edition 500ml mug with protein powder starter kit — social media unboxing angle drives organic content

Corporate Holiday Gifting: HR department sends 1,000 branded 150ml espresso mugs to key clients with artisanal coffee sample — unboxing experience on brand

Retail Merchandising Display: Outdoor gear retailer stocks 80ml mini mugs as checkout counter impulse item — factory color options match brand palette

Wholesale Reseller Catalog: Promotional products distributor sources 5,000 mixed-capacity mugs with 8 different logo designs for corporate gift reseller inventory

Camping Festival Staff Kit: Event organizer equips 200 festival staff with durable 500ml enamel mugs for hydration — sublimation-printed staff branding

International Corporate Gift Shipment: European marketing director orders 2,000 mugs for pan-European client appreciation program — sea freight consolidated to Brussels distribution hub

Materials, Construction & Specifications

MATERIAL PRIMARY: Carbon steel plate — available thicknesses: 0.2mm, 0.3mm, 0.35mm, 0.5mm

MATERIAL SECONDARY: Food-grade enamel coating fused to steel substrate — LFGB certified

DRINKWARE PERFORMANCE PARAMETERS:
CAPACITY: 80ml | 130ml | 150ml | 250ml | 350ml | 500ml | 750ml
WALL THICKNESS: Determined by steel plate thickness option (0.2–0.5mm) plus enamel layer
INSULATION TYPE: None — single-wall metal construction
TEMPERATURE RETENTION: Not specified by supplier — verify before quoting.
LEAK-PROOF RATING: N/A — open mug design without lid
LID MATERIAL: None

STANDARD DIMENSIONS: 15cm × 15cm × 15cm single package dimensions — actual mug dimensions vary by capacity option

CUSTOMIZABLE DIMENSION RANGE: 5cm, 6cm, 7cm, 8cm, 9cm, 10cm, 12cm heights available per OEM spec

WEIGHT PER UNIT: 1.0kg gross weight per packaged single item

PRINT AREA DIMENSIONS: Full-wrap cylindrical body area — height range 6–12cm depending on capacity — handle zone excluded from print surface

SURFACE TREATMENT OPTIONS: Enamel coating (standard finish), sublimation print surface, decal application surface

COLOR OPTIONS: OEM custom colors — standard options: red, orange, black, white, yellow, blue, green

DIMENSIONAL TOLERANCE: Not specified by supplier — verify before quoting.

COMPLIANCE STANDARDS MET: LFGB, Food-grade

Manufacturing Details

Step 1: Raw carbon steel coil incoming inspection — thickness verification at 0.2mm/0.3mm/0.35mm/0.5mm tolerances — steel plate cut to mug body blanks

Step 2: Press forming into mug shape — handle attachment via spot welding — rim rolling for smooth drinking edge — surface cleaning and degreasing

Step 3: Enamel frit application — wet dipping method — fusion firing at 820-850°C — interior and exterior coating application — second firing for finish layer

Step 4: Sublimation print setup — heat transfer at 180-200°C with 40-50 seconds pressure — CMYK color application using sublimation dye inks — transfer paper placement verified for full-wrap registration — print area curing

Step 5: Final QC inspection — enamel thickness check — print registration verification (≤2mm tolerance) — visual inspection for color consistency — rim integrity check

Technical note: Artwork requirements — vector files preferred (AI, EPS, PDF) or high-resolution raster at 300 DPI minimum — convert all text to outlines — provide Pantone references for spot colors — full-wrap designs require 360° artwork with bleed allowance — maximum print height varies with capacity (6cm for 80ml to 12cm for 750ml)

Packaging, Carton & Shipping Details

ORIGIN & FACTORY TYPE: Zhejiang, China — integrated metal forming and enamel coating facility with in-house sublimation printing line

INNER PACKAGING: Single item wrapped in bubble bag, then packed in egg-crate foam insert

MASTER CARTON: 15cm × 15cm × 15cm per single package — carton configuration depends on capacity size (80ml to 750ml mugs), gross weight 1.0kg per packaged unit

PALLET SPEC: 48 units per pallet for 80ml–350ml capacities | 36 units per pallet for 500ml–750ml capacities | Stackable up to 3 layers high

EXPRESS SHIPPING: DHL/FedEx — 5–7 business days transit to US/EU — quantities up to 50kg

SEA FREIGHT: FCL 20' container holds approx 8,000–10,000 units depending on capacity — 18 days to US West Coast | 28 days to EU ports — recommended above 3,000 pieces

REQUIRED DOCUMENTATION: Commercial invoice, packing list, certificate of origin, LFGB test report, Bill of Lading, packing declaration

HS CODE CATEGORY: 6912.00.4810 — ceramic tableware (enamel-coated metal drinkware classified under related porcelain/ceramic tableware code) — duty rates 4–6% US, 5–8% EU depending on country

IMPORT COMPLIANCE NOTES: LFGB certification for food-contact surfaces required for EU — FDA compliance for US food-contact materials (enamel coating meets standards under 21 CFR) — importers should verify state-specific Proposition 65 labeling for California

QUALITY GATE: Pre-shipment inspection with 2% defect tolerance — random sampling from production batch — QC report provided for bulk orders above 1,000 pieces

How Much Should You Order?

STARTER 500–1,000 pcs: Initial corporate merchandise program launch | Entry-level wholesale investment with full sublimation capability

SMALL BATCH 1,000–3,000 pcs: Conference swag bags for 3-5 events across a quarter | Standard wholesale pricing, art setup costs amortized

MID VOLUME 3,000–10,000 pcs: Multi-quarter employee onboarding kits or product launch promotional campaigns | Sea freight viable, optimized unit economics

BULK 10,000–50,000 pcs: National retail chain reseller program or large-scale hotel procurement | Best unit economics, pallet shipping, extended payment terms available

ENTERPRISE 50,000+ pcs: Global brand merchandise distribution across 5+ markets | Custom pricing, dedicated account manager, factory QC report included, warehousing options

Order Quantities & Volume Options

Minimum 500 pcs per design/size | Bulk pricing from 1,000+ pcs | Samples available

Production Schedule & Lead Time

31 business days for 1-500 pcs | 32 days for 501-1,000 | 33 days for 1,001-3,000 | Sea freight +18-22 days to US/EU

Questions Buyers Often Ask

Q: Corporate employee welcome kits, outdoor brand promotional giveaways, conference speaker gifts, hotel in-room amenities, retail merchandise counters, wholesale camping equipment catalogs

Q: Is the LFGB food-grade certification valid for the entire mug including the handle and rim, or just the interior?

A: The LFGB certification covers all food-contact surfaces — interior cavity, rim, and exterior where lips may contact. The testing protocol applies to the complete enamel coating, including the rolled rim area that's most exposed to chipping. We can provide test reports showing compliance for each steel thickness option in our production line.

Q: What's the actual color accuracy for sublimation logos — can you match a complex brand gradient with 6 colors?

A: Sublimation supports full CMYK color reproduction with a practical color gamut similar to digital printing. Pantone matching is available through our color management system — we run a color calibration print before production to confirm match. For gradient designs and photo-realistic artwork, sublimation delivers continuous tones without halftone dots. Just provide vector artwork (AI/EPS/PDF) or high-res raster (300 DPI minimum) with Pantone references for spot color matching.

Q: What's the real MOQ for 250ml mugs with a full-wrap sublimation print, and how does that compare to 500ml?

A: The MOQ is 500 pieces per design and capacity size regardless of the capacity option — 250ml and 500ml share the same 500-piece threshold. This keeps your initial inventory investment consistent whether you choose espresso-sized cups or large camping mugs. Lead time starts at 31 business days for the first 500 pieces and scales up for larger volumes.

Q: How does the factory handle quality control for sublimation alignment on curved mug surfaces?

A: The QC protocol checks registration marks on each mug — we run 100% visual inspection for logo placement accuracy within ±2mm tolerance. Any mug with print wrap misalignment or color inconsistency outside the tolerance is rejected and replaced. A random sampling of 5 pieces per 100-unit batch undergoes destructive testing for enamel adhesion and scratch resistance before shipment.

Q: What's the shipping timeline difference between air and sea freight for a 2,000-piece order to Los Angeles?

A: Air freight via DHL takes 5–7 business days from shipment, but costs significantly more — recommended for urgent orders. Sea freight takes 18 days to US West Coast, with LCL options available. For 2,000 pieces, sea freight is the economical choice. We can quote both options with door-to-door tracking so you can compare cost against timeline.

Q: How do these enamel mugs compare to ceramic mugs for a corporate gift program with 1,000 recipients?

A: Ceramic mugs are heavier (approx 400g vs 200g for enamel) and more prone to chipping during shipping. Enamel mugs at 0.3mm steel thickness weigh roughly half of equivalent ceramic, reducing shipping costs for large orders. The enamel surface also handles dishwasher cycles better than ceramic glazing. For travel or camping promotions, the lightweight metal body clearly out-performs ceramic.

Q: Can I reorder the same design with different lead times for quarterly employee onboarding batches?

A: Yes. Our production line retains artwork files for 18 months for repeat orders. You can schedule quarterly batch releases — typical lead time for 200 pieces runs 31 business days. For recurring orders, we recommend consolidating into a single production run to reduce setup costs. We also offer warehousing options to split delivery across multiple months while maintaining a single production cost.

Why SupplyBatch

Real Craftsmanship, Small-Batch Ready

We don’t just chase scale; we care about the details. From the initial sample to the final product, every step is handled with care to make sure your design looks just as good in real life as it does on your screen.

At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive.

Quality Checked & Shipped Right

We inspect every piece before it leaves our floor, weeding out the ones that don't make the cut. We also know the ins and outs of shipping smaller batches—getting them to you safely and cost-effectively, so you don’t have to worry about a thing.

You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.

Customization with Brand Services

Customization with a Personal Touch

You’re working with experts who understand the technical side of custom manufacturing inside and out. We don’t just process orders; we act as an extension of your team. Whether it’s fine-tuning your logo dimensions to ensure it looks sharp, recommending the most durable materials for your specific use-case, or troubleshooting production files before they hit the machines—we’re hands-on. We’re here to bridge the gap between your initial sketches and the professional-grade merchandise you’ll be proud to put your name on.
At SupplyBatch, you’re working with real product pros. We know that custom merch is your brand’s reputation on the line, so we dig into the details: we’ll analyze your artwork, suggest material upgrades for longevity, and double-check your proofing so there are no surprises when the boxes arrive. You bring the vision, and we bring the practical, boots-on-the-ground expertise to turn your ideas into high-quality products that actually hit the mark.