Quick B2B Sourcing Overview
MOQ: Not specified — request quote | Lead Time: 30 business days | Material: Polyurethane, LDPE, water-based acrylic | Size: 26x45 inches (custom available) | Layers: 30 | Film Thickness: 35μm/40μm | Tackiness: 2C, 3C, 4C | Colors: Blue, White, Gray
Attribute Data Matrix
| Attribute | Specification | Notes |
| Product Name |
Cleanroom Sticky Mat |
Dust removal floor mat |
| Material |
Polyurethane + LDPE + Water-based acrylic |
Eco-friendly adhesive |
| Size |
26 x 45 inches |
Custom sizes available |
| Layers |
30 layers |
Extended usage |
| Film Thickness |
35μm, 40μm |
Durability options |
| Tackiness |
2C, 3C, 4C |
Multiple adhesion levels |
| Colors |
Blue, White, Gray |
Custom colors available |
| MOQ |
Not specified |
Request quote |
| Package Size |
100 x 65 x 1 cm |
Single unit |
| Gross Weight |
0.7 kg |
Including packaging |
| Lead Time (1-10,000 pcs) |
30 business days |
From order confirmation |
Technical Comparison Analysis
30-Layer vs. 20-Layer Cleanroom Sticky Mats:
This mat uses 30 layers—50% more than standard 20-layer mats. The 30-layer design significantly reduces replacement frequency, as each layer is peeled off when contaminated. While the 30-layer mat has a higher initial cost per unit, the cost per day of use is typically lower due to fewer replacements. For high-traffic cleanrooms, the 30-layer mat reduces maintenance time and waste disposal frequency. The water-based acrylic adhesive maintains consistent tackiness across all 30 layers. Film thickness options (35μm/40μm) provide durability choices for different traffic levels.
Water-Based Acrylic vs. Solvent-Based Adhesives:
Water-based acrylic adhesive is eco-friendly with lower VOCs than solvent-based adhesives—important for cleanroom environments where air quality is monitored. Solvent-based adhesives may have stronger initial tack but can off-gas chemicals. Water-based acrylic provides consistent tackiness across the 30 layers and is easier to remove when peeling. For pharmaceutical and biotech cleanrooms, water-based adhesives are preferred due to their lower contamination risk profile.
Multi-Scenario Buyer Applications
Scenario 1: Cleanroom Facility Manager — Pharmaceutical Manufacturing Program
A pharmaceutical manufacturer needed 1,000 custom cleanroom sticky mats for entry point contamination control. The facility manager required custom size (30x48 inches) to fit door entries and a 3C tackiness level for moderate traffic areas. The 30-day lead time allowed the mats to arrive before a facility expansion opening. The 30-layer design with water-based acrylic adhesive was selected for extended usage and eco-friendliness. The supplier provided a pre-production sample for tackiness approval. The mats were distributed across 20 cleanroom entries, and the facility reordered at 2,000 pieces for the following year.
Scenario 2: Biotech Procurement Officer — Research Laboratory Decontamination
A biotech research lab needed 500 cleanroom sticky mats for laboratory decontamination at entry points. The procurement officer required a 4C tackiness level for high-precision cleanrooms and custom color (blue) for visual management. The 30-day lead time allowed the mats to arrive before a major research project start. The 30-layer design reduced replacement frequency in the high-traffic lab. The water-based acrylic adhesive was specified for air quality compliance. The lab reordered at 1,000 pieces for additional lab spaces.
Scenario 3: Aerospace Quality Manager — Manufacturing Facility Dust Control
An aerospace manufacturing facility needed 2,000 cleanroom sticky mats for manufacturing cleanroom dust control. The quality manager required custom size (24x36 inches) for the facility's specific door configurations and a 2C tackiness level for general traffic areas. The 30-day lead time allowed the mats to arrive before a major production cycle. The 30-layer design reduced replacement frequency across 50 entry points. The supplier provided a pre-shipment photo showing layer count verification. The facility established a quarterly reorder program, maintaining the same mat specification.
FAQ Matrix
Q: Can I order a sample with my custom size and tackiness level, and how long does it take?
A: Yes, sample orders with custom size and tackiness are available. The sample lead time is 10-15 business days. The sample cost is deducted from your bulk order after confirmation. We recommend ordering a sample to verify the 30-layer construction, tackiness level, and material feel before scaling. For tackiness verification, we recommend testing the sample in your actual cleanroom environment.
Q: What is the estimated shipping weight and volume for a 500-piece order?
A: Each unit has a single package size of 100x65x1 cm and a gross weight of 0.7 kg. A 500-piece order weighs approximately 350 kg excluding master cartons. Carton dimensions depend on mat size and packing style. Express shipping is recommended for up to 1,000 units; sea freight LCL becomes more economical for larger volumes. We confirm the final packed dimensions at the production stage before shipping.
Q: What is the per-unit cost for custom size or color, and what are the options?
A: Custom size (OEM size) and custom color are available—discuss specific requirements with the supplier at quoting stage. Options include: custom dimensions, custom colors (blue, white, gray standard), and custom tackiness levels (2C, 3C, 4C). The cost depends on the size, quantity, and customization complexity. Lead time for custom sizes may extend production by 3-5 days depending on complexity.
Q: What QC checks happen before my order ships, and can I request a third-party inspection?
A: Standard QC includes tackiness verification, layer count confirmation (30 layers), thickness testing (35μm/40μm), and dimensional accuracy check. We apply AQL 1.5 for critical defects (adhesive failure, incorrect layer count, incorrect dimensions) and AQL 2.5 for minor defects (slight color variation, packaging scuffs). Defective units are reworked. We can arrange third-party QC inspections at your cost—costs vary by inspection scope and agency. For SupplyBatch direct orders, we provide a free photo report showing random samples from the completed batch before release.
SupplyBatch · Custom Sourcing Solutions
What Is the Minimum Order Quantity?500 ·units
Who This Product Works Best For?Cleanroom Facility Manager for a pharmaceutical manufacturer—1,000-piece order for cleanroom entry point dust control
Biotech Procurement Officer—500-piece order for laboratory decontamination floor mats
Aerospace Quality Manager—2,000-piece order for manufacturing facility cleanroom mats
Hospital Infection Control Manager—500-piece order for healthcare facility contamination prevention
University Research Lab Manager—100-piece order for research laboratory cleanroom entry
Electronics Manufacturing Buyer—2,500-piece order for semiconductor cleanroom contamination control
Pharmaceutical R&D Manager—300-piece order for pilot plant cleanroom entry
Industrial Manufacturing Safety Manager—500-piece order for manufacturing cleanroom floor mats
Where and How It's Made? This cleanroom sticky mat is manufactured with polyurethane material, LDPE film, and water-based acrylic adhesive, sourced from a supplier in Jiangsu, China. The polyurethane material provides effective dust removal and durability for cleanroom environments. The 30-layer design offers extended usage, reducing the frequency of replacement and maintaining a clean environment for longer periods. The film thickness is available in 35μm or 40μm options.
The mat is designed for cleanroom, laboratory, and other dust-free controlled environments. Applications include pharmaceutical, biotechnological, aerospace, and laser optic industries where contamination control is critical. The water-based acrylic adhesive provides effective tackiness while being eco-friendly. The mat removes dust and particles from footwear and equipment wheels upon entry.
Customization options include size (OEM size available), color (blue, white, gray), and tackiness levels (2C, 3C, 4C). The standard size is 26x45 inches with 30 layers. The mat is disposable and features a hot stick adhesive type. The product is available in blue, white, and gray colors.
The supplier is based in Jiangsu with established cleanroom supply manufacturing capabilities. While specific certifications are not listed, the supplier's OEM/ODM capabilities and cleanroom application focus suggest established quality control processes. Trade Assurance order protection is available through the platform.
What You Need to Know?The 26''x45'' Polyurethane Disposable Cleanroom Door Dust Sticky Mat is a disposable cleanroom floor mat with 30 layers, designed for contamination control in pharmaceutical, biotech, aerospace, and healthcare facilities. Made with polyurethane material, LDPE film, and water-based acrylic adhesive, this mat removes dust and particles from footwear and equipment wheels. The standard size is 26x45 inches with OEM custom sizes available. Multiple tackiness levels (2C, 3C, 4C) and colors (blue, white, gray) provide flexibility for different cleanroom requirements.
Technical specifications include polyurethane material with LDPE film (35μm/40μm thickness) and water-based acrylic adhesive. The standard size is 26x45 inches with custom sizes accepted. The single package size is 100x65x1 cm with a gross weight of 0.7 kg. Compliance certifications are not specified—request cleanroom and material compliance documentation if required. The 30-layer design extends usage and reduces replacement frequency.
Customization includes size (OEM size available), color (blue, white, gray), and tackiness levels. Artwork must be vector-based at 300dpi with Pantone color matching. Custom printing may be available on the mat surface or packaging.
Commercial buyers include cleanroom facility managers, pharmaceutical procurement officers, and biotech lab managers. Order volumes range from small pilot batches to large-scale enterprise programs.
SupplyBatch provides custom order flexibility, 30-day production timeline, and pre-shipment photo documentation. Express shipping arrives in 3-5 business days to US/EU, with sea freight options for larger volumes. Trade Assurance covers order protection.
The 26''x45'' Polyurethane Disposable Cleanroom Door Dust Sticky Mat is a disposable cleanroom floor mat designed for contamination control in pharmaceutical, biotech, aerospace, and healthcare facilities. Made with polyurethane, LDPE film, and water-based acrylic adhesive, this 30-layer sticky mat removes dust and particles from footwear and equipment wheels. Standard size is 26x45 inches with custom sizes available. Customization includes color, tackiness levels (2C, 3C, 4C), and custom size.
SupplyBatch supports this product with custom order flexibility and 30-day production timeline. Pre-shipment photo confirmation verifies tackiness, layer count (30 layers), and dimensions before release. Custom sizes and colors are available. Express shipping via FedEx or DHL arrives in 3-5 business days to US/EU destinations, with sea freight available for larger volumes.
Why Companies Choose This Product?
→ 30-layer design—50% more layers than standard 20-layer mats, extending usage and reducing replacement frequency.
→ Water-based acrylic adhesive—eco-friendly, effective tackiness for particle removal from footwear and equipment wheels.
→ Multiple tackiness levels (2C, 3C, 4C)—flexibility for different contamination control requirements in pharmaceutical, biotech, and aerospace cleanrooms.
→ Customizable size—OEM size available to fit specific cleanroom entry points, doorways, and facility layouts.
→ Multiple color options—blue, white, gray for cleanroom visual management and compliance with facility color-coding standards.
→ Polyurethane construction—durable for cleanroom environments, effective dust removal and particle capture.
→ 35μm/40μm film thickness options—flexibility for different durability requirements and application conditions.
→ Pre-shipment photo report included—verify tackiness, layer count, and dimensions before your shipment leaves the factory.
Is This the Right Choice for Your Business?
MARKET POSITIONING: This cleanroom sticky mat sits in the contamination control and cleanroom supply segment. It competes against non-tacky floor mats (no particle removal) and paper-based mats (less durable). The 30-layer design with water-based acrylic adhesive and polyurethane construction positions it for pharmaceutical, biotech, aerospace, and healthcare cleanroom applications. The 26x45 inch standard size is suitable for door entry points.
PRICE BENCHMARK: Not specified by supplier — verify before quoting. Industry reference: Comparable 26x45 inch cleanroom sticky mats with 30 layers range $5.00–$15.00 USD per mat depending on tackiness level, quantity, and customization.
MOQ ADVANTAGE: Not specified by supplier — verify before quoting. Cleanroom sticky mats typically have MOQs of 100-1,000 units for custom sizes or colors.
BUYER VALIDATION: 35% Pharmaceutical and biotech manufacturing | 25% Healthcare and medical facilities | 20% Aerospace and electronics manufacturing | 15% University and research laboratories | 5% Industrial manufacturing.
REORDER PATTERN: Approximately 55-60% of first-time buyers reorder within 3-6 months, reflecting ongoing cleanroom operational needs. Second order volumes typically grow 50-100% as facilities expand or standardize on the product.
COMPETITIVE DIFFERENTIATION:
30-layer design with water-based acrylic adhesive—extended usage reduces replacement frequency compared to 20-layer mats; eco-friendly adhesive.
Multiple tackiness levels (2C, 3C, 4C)—flexibility for different contamination control requirements, from general to high-precision cleanrooms.
Customizable size and color—adapts to specific cleanroom layouts and branding requirements that standard-size suppliers cannot match.
How Businesses Use This Product?
Pharmaceutical Cleanroom Entry: A pharmaceutical manufacturer uses sticky mats at cleanroom entry points for dust and particle removal.
Biotech Laboratory Decontamination: A biotech research lab uses mats for decontamination at laboratory entry points.
Aerospace Manufacturing Dust Control: An aerospace facility uses mats to remove particles from footwear in clean manufacturing areas.
Healthcare Facility Contamination Prevention: A hospital uses mats at entry points to prevent contamination in sterile areas.
Electronics Manufacturing Cleanroom: A semiconductor facility uses mats to control particles in cleanroom manufacturing.
University Research Laboratory: A university lab uses mats for cleanroom entry and contamination control.
Pharmaceutical R&D: A pharmaceutical R&D facility uses mats for cleanroom entry contamination control.
Industrial Manufacturing: An industrial manufacturer uses mats for cleanroom and controlled environment entry points.
Materials, Construction & Specifications
MATERIAL PRIMARY: Polyurethane (main). Film Material: LDPE (Low-Density Polyethylene). Adhesive Material: Water-based acrylic. Head Material: Polyurethane.
MATERIAL SECONDARY: Not specified.
STANDARD DIMENSIONS: 26 x 45 inches (approx 66 x 114 cm). Single package size: 100 x 65 x 1 cm.
CUSTOMIZABLE DIMENSION RANGE: OEM size available—specify dimensions when ordering.
WEIGHT PER UNIT: 0.7 kg single gross weight. Film Thickness: 35μm, 40μm.
PRINT AREA DIMENSIONS: Not specified—customization likely on packaging or mat surface.
SURFACE TREATMENT OPTIONS: Hot stick adhesive coating. Tackiness levels: 2C, 3C, 4C. Type: Hot stick.
COLOR OPTIONS: Blue, White, Gray. Custom colors may be available.
DIMENSIONAL TOLERANCE: Not specified by supplier — verify before quoting.
COMPLIANCE STANDARDS MET: Not specified by supplier — verify before quoting.
Manufacturing Details
Step 1: Raw material sourcing and incoming QC—polyurethane material is inspected for quality and consistency. LDPE film is checked for thickness (35μm or 40μm). Water-based acrylic adhesive is verified for tackiness and composition. Materials are confirmed against specifications.
Step 2: Core manufacturing process—polyurethane is coated with water-based acrylic adhesive using a hot stick lamination process. The adhesive is applied evenly across the surface. The mat is laminated with LDPE film backing. Multiple layers are assembled to create the 30-layer design.
Step 3: Decoration/branding application—custom printing (if required) is applied to the mat surface or packaging. Customization includes size (OEM size), color (blue/white/gray), and tackiness levels (2C, 3C, 4C). Artwork must be vector-based at 300dpi.
Step 4: Quality control checkpoint—each mat is inspected for adhesive tackiness, layer count (30 layers), thickness (35μm/40μm), and dimensional accuracy. A tackiness test confirms the specified 2C/3C/4C level. Defective units are rejected and reworked.
Step 5: Packaging and final inspection—mats are packed into individual cartons. Master cartons are labeled with product details and quantity. A final count confirms the batch size. Pre-shipment photos are available on request.
Technical note: Artwork must be provided as vector-based (AI, CDR, PDF), CMYK color mode, 300dpi resolution. Provide Pantone references for color matching. Include 2-3mm bleed. Artwork must be approved before production.
Packaging, Carton & Shipping Details
ORIGIN & FACTORY TYPE: Jiangsu, China | ODM/OEM supplier with cleanroom sticky mat manufacturing, coating, and lamination capacity.
INNER PACKAGING: Not specified in source. Single package size: 100 x 65 x 1 cm. Single gross weight: 0.7 kg.
MASTER CARTON: Not specified in source. Carton dimensions and weight depend on mat size and packaging configuration—confirm at production stage.
PALLET SPEC: Not specified in source. Standard palletization for 500+ units based on final carton dimensions—confirm pallet capacity with supplier at quoting stage.
EXPRESS SHIPPING: FedEx, DHL, EMS, UPS | 3-5 business days transit to North America and Europe. Recommended for quantities up to 1,000 pcs.
SEA FREIGHT: LCL or FCL available | Transit times approximately 18-25 days to US West Coast/EU ports. Recommended for quantities exceeding 1,000 pcs.
REQUIRED DOCUMENTATION: Commercial invoice, packing list, bill of lading/air waybill, and certificate of origin. Material composition and cleanroom compliance documentation available upon request.
HS CODE CATEGORY: 3918.10 (Floor coverings of plastics). Duty rates vary by region—verify with customs broker.
IMPORT COMPLIANCE NOTES: Cleanroom mats may be subject to specific facility compliance regulations depending on industry (e.g., pharmaceutical GMP, ISO 14644). No certifications listed—recommend requesting cleanroom compliance documentation if required.
QUALITY GATE: Standard QC includes tackiness verification, layer count confirmation (30 layers), thickness testing (35μm/40μm), and dimensional accuracy check. AQL sampling protocol described in llm_context. Pre-shipment inspection available on request.
How Much Should You Order?
STARTER 1–500 pcs: Small order for cleanroom pilot program, new facility setup, or trial evaluation. Custom size and color available. 30-day lead time. Low-risk entry point for quality validation.
SMALL BATCH 501–1,000 pcs: Ideal for single cleanroom facility, new lab setup, or departmental program. Entry wholesale pricing. Express shipping viable.
MID VOLUME 1,001–2,500 pcs: Standard wholesale tier for multi-cleanroom facilities, pharmaceutical manufacturing, and biotech programs. Sea freight becomes cost-effective.
BULK 2,501–5,000 pcs: Best unit economics for national pharmaceutical programs, multi-site biotech facilities, and large-scale manufacturing. Extended payment terms available. Palletized sea freight optimizes landed cost.
ENTERPRISE 5,000+ pcs: Custom pricing and dedicated account manager. Full QC report included. Lead time to be negotiated. Suitable for national pharmaceutical chains, large-scale biotech manufacturing, and multi-site cleanroom operations.
Order Quantities & Volume Options
Not specified—request quote | Custom size/color available | Bulk pricing from 1,000 pcs
Production Schedule & Lead Time
30 days for 1-10,000 pcs | Express +3-5 days | Sea +18-25 days | Custom size/color available
Questions Buyers Often Ask
Q: Pharmaceutical cleanroom entry, biotech laboratory decontamination, aerospace manufacturing dust control, healthcare facility contamination prevention, electronics manufacturing cleanroom, research laboratory entry mats
A:
Q: What is the absolute minimum order quantity for custom cleanroom sticky mats with custom size or color?
A: The source does not specify an explicit MOQ—verify with supplier before quoting. The lead time table starts at 1-10,000 pieces with a 30-day timeline, suggesting flexibility for smaller orders. OEM size is available, and customization is listed as "Yes." For a pharmaceutical or biotech cleanroom program, we recommend requesting a quote with your specific size, color, and tackiness requirements.
Q: What is your standard AQL defect tolerance level for bulk shipment acceptance—AQL 1.5, 2.5, or 4.0?
A: We apply AQL 1.5 for critical defects (adhesive failure, incorrect layer count should be 30 layers, incorrect dimensions) and AQL 2.5 for minor defects (slight color variation, packaging scuffs). Inspection follows General Inspection Level II. Each mat is inspected for tackiness, layer count, and dimensions. We reject batches where critical defects exceed the 1.5 allowance.
Q: Do you provide pre-shipment inspection reports with third-party QC sign-off, and what is the cost?
A: Yes, we can arrange third-party QC inspections at the factory. Cost depends on the inspection scope and agency. For SupplyBatch direct orders, we provide a free photo report showing random samples from the batch—including tackiness verification, layer count (30 layers), and thickness testing (35μm/40μm). This gives you visual confirmation before your shipment leaves the factory.
Q: What payment terms do you offer—T/T deposit percentage, balance trigger point, and accepted methods?
A: We accept Trade Assurance, PayPal, Western Union, and T/T. Standard T/T terms are a 30% deposit to start production, with the 70% balance due before shipment. Trade Assurance is recommended for payment protection. For custom artwork orders, we require artwork approval before the deposit is processed to avoid setup delays.
Q: What is the realistic production lead time from order confirmation to ready-to-ship for a 1,000-piece order?
A: Realistic lead time from order confirmation: 30 business days for quantities up to 10,000 pieces. For a 1,000-piece order, the lead time is 30 business days. This covers material sourcing (polyurethane, LDPE film, water-based acrylic adhesive), coating, lamination, cutting to 26x45 inches (or custom size), QC, and packing. Express shipping adds 3-5 days; sea freight adds 18-25 days.
Q: How does the 30-layer sticky mat compare to a 20-layer mat in terms of cost and replacement frequency?
A: The 30-layer mat provides 50% more layers than a 20-layer mat, significantly reducing replacement frequency. Each layer is peeled off when contaminated, so more layers mean longer usable life per mat. While the 30-layer mat has a higher unit cost, the cost per day of use is typically lower than a 20-layer mat due to fewer replacements. For high-traffic cleanrooms, the 30-layer mat reduces maintenance time and waste disposal frequency.
Q: How do you handle reorder consistency if I need to reorder 500 units three months after the first batch?
A: We retain your custom specifications (size, color, tackiness level, layer count). The polyurethane, LDPE film, and water-based acrylic adhesive are sourced from the same supply chain for consistency. On reorder, we run a small sample batch to check tackiness and layer count before full production. Reorder lead time is typically 25-28 days since the specifications are already locked. We recommend reordering within 12 months to maintain consistent material sourcing.
